GB/T 34930-2017Operation and control specification for microgrids connected to distribution network (English PDF)
微电网接入配电网运行控制规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34930-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 34930-2017 is the English-translated version of 微电网接入配电网运行控制规范.
GB/T 34930-2017 is the Chinese standard "Operation and control specification for microgrids connected to distribution network". Its scope clause reads: This standard specifies the micro-grid access distribution network operation and control should follow the norms and requirements.
Including the operation mode and control strategy of microgrid Slightly, tie line exchange power control, and/off-grid conversion control, relay protection and safety automatic device, grid abnormal response, power quality, communication With automation, lightning protection and grounding.
This standard applies to access 35kV and below voltage level distribution network microgrid system. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 34930-2017
National Standard of the People's Republic of China
- ICS
- 29.240.01
- Classification
- F 21
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General
- 5 operating mode and control strategy
- 6 tie line exchange power control
- 7 and/off-grid conversion control
- 8 relay protection and safety automatic device
- 9 grid abnormal response
- 10 power quality
- 11 Communication and Automation
- 12 lightning protection and grounding
- Appendix A (informative) microgrid record information
1 Scope
This standard specifies the micro-grid access distribution network operation and control should follow the norms and requirements. Including the operation mode and control strategy of microgrid
Slightly, tie line exchange power control, and/off-grid conversion control, relay protection and safety automatic device, grid abnormal response, power quality, communication
With automation, lightning protection and grounding.
This standard applies to access 35kV and below voltage level distribution network microgrid system.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 12325 power quality power supply voltage deviation
GB/T 12326 power quality voltage fluctuations and flicker
GB/T 14549 Power Quality Utility Harmonic
GB/T 15543 power quality three-phase voltage imbalance
GB/T 24337 Power Quality Public Grid Interharmonics
Regulation of operation setting of relay protection device for 3kV ~ 110kV power grid
DL/T 995 relay protection and grid security automatic device inspection procedures
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Microgrid
Composed of distributed generation equipment, electricity load, monitoring/protection and automation devices (including energy storage if necessary)
The internal power is basically a small balance of power network. It can be both grid operation with the external power grid, you can also run independently from the network.
3.2 Pointofinterconnection
Micro-grid and distribution network electrical connection point.
3.3 Plan off-line intentionaloffgrid
Microgrid in accordance with pre-planned by the grid mode switch to off-grid mode.
3.4 Unplanned off-grid
When the microgrid detects a power grid anomaly, the unplanned switch from the grid-connected mode to the off-grid mode.
3.5 Island islanding
Part of the power grid that contains the load and power supplies will remain isolated until it detaches from the primary network. Isolated islands can be divided into non-planned islands and meters […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 42731-2023Technical requirements for the microgrid
- GB/T 43463-2023Requirements for operation and control of microgrid cluster
- RB/T 080-2021Guidelines for acceptance for terminal integrated multi-energy complementary energy system
- GB/T 38953-2020Technical requirements for relay protection of microgrid
Similar standards
How to Download GB/T 34930-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 34930-2017
$145.00