GB/T 34916-2017Nanotechnologies - Multi-walled carbon nanotubes - Determination of amorphous carbon content by thermogravimetric analysis (English PDF)
纳米技术 多壁碳纳米管 热重分析法测试无定形碳含量
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34916-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
September 1, 2018
Scope
GB/T 34916-2017 is the English-translated version of 纳米技术 多壁碳纳米管 热重分析法测试无定形碳含量.
GB/T 34916-2017 is the Chinese standard "Nanotechnologies - Multi-walled carbon nanotubes - Determination of amorphous carbon content by thermogravimetric analysis".
Its scope clause reads: This standard specifies the terms and definitions of the determination of amorphous carbon content in multi-walled carbon nanotubes by thermogravimetric analysis under a carbon dioxide atmosphere, Using instruments and reagents, determination methods and procedures, analysis of results and test report content.
This standard applies to chemical vapor deposition obtained metal oxide content of less than 10% of the multi-walled carbon nanotubes. Other preparation methods Multi-walled carbon nanotubes can be obtained by reference to this method. Its clauses include terms and definitions; principle.
Found what you need?
Document preview — GB/T 34916-2017
National Standard of the People's Republic of China
- ICS
- 59.100.20
- Classification
- G 13
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 principle
- 5 instruments and reagents
- 6 determination method
- 7 Results Analysis
- 8 test report
- Appendix A (informative) Thermogram chart of atypical multi-walled carbon nanotubes Figure
- Appendix B (Informative) Multi-walled carbon nanotubes amorphous carbon content test report
- References
1 Scope
This standard specifies the terms and definitions of the determination of amorphous carbon content in multi-walled carbon nanotubes by thermogravimetric analysis under a carbon dioxide atmosphere,
Using instruments and reagents, determination methods and procedures, analysis of results and test report content.
This standard applies to chemical vapor deposition obtained metal oxide content of less than 10% of the multi-walled carbon nanotubes. Other preparation methods
Multi-walled carbon nanotubes can be obtained by reference to this method.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 5314 powder metallurgy powder sampling method
GB/T 6425 thermal analysis terms
GB/T 19619 nanomaterials terminology
GB/T 24491 multi-walled carbon nanotubes
Thermogravimetric analysis of oxidation temperature and ash content of carbon nanotubes
JC/T 2144 carbon nanotubes purity test method
3 Terms and definitions
GB/T 6425, GB/T 19619, GB/T 24491 and GB/T 29189 defined by the following terms and definitions apply to this file.
3.1 Amorphous carbon
Amorphous carbon and disordered carbon formed by the stacking of molecular fragments of the graphite layered structure.
4 principle
This standard is based on the characteristics of multi-walled carbon nanotubes and amorphous carbon in carbon dioxide at high temperature reactivity differences, the use of carbon dioxide oxygen
Multi-walled carbon nanotubes amorphous carbon, with a thermal gravimetric analyzer to record the relationship between the sample mass and temperature, that is, thermogravimetry (thermogravimetry,
TG) curve. When amorphous carbon and carbon dioxide react, continue to absorb the heat of the surrounding environment, will not cause the local temperature is too high and up to
To the reaction temperature of the multi-walled carbon nanotubes, thereby separating the amorphous carbon and the multi-walled carbon nanotubes reaction process, the reaction is as follows.
C CO2 -> 2CO-Q
In the formula.
C --- amorphous carbon;
Q --- heat.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34916-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34916-2017
$145.00