GB/T 34906-2017Geological evaluating methods for tight oil (English PDF)
致密油地质评价方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34906-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 34906-2017 is the English-translated version of 致密油地质评价方法.
GB/T 34906-2017 is the Chinese standard "Geological evaluating methods for tight oil". Its scope clause reads: This standard specifies the geological evaluation of tight oil content, parameters and methods.
This standard applies to the tight oil geological evaluation. Its clauses include terms and definitions; tight oil geological evaluation.
Found what you need?
Document preview — GB/T 34906-2017
National Standard of the People's Republic of China
- ICS
- 75
- Classification
- E 11
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 tight oil geological evaluation
- 5 major achievements
- Appendix A (Normative) Dense oil geology dessert area evaluation index
1 Scope
This standard specifies the geological evaluation of tight oil content, parameters and methods.
This standard applies to the tight oil geological evaluation.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
SY/T 5336 core analysis method
Geochemical evaluation of SY/T 5735 terrestrial source rocks
SY/T 5838 onshore oil and gas proved economically recoverable reserves evaluation rules
SY/T 6285 method for reservoir evaluation
Determination of rock porosity and permeability under SY/T 6385 overburden
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Tight oil
Tight sandstones that accumulate in the overburden matrix with a permeability less than or equal to 0.1 × 10-3µm2 (air permeability less than 1 × 10-3µm2)
Oil in tight carbonate or other reservoirs, or oil with a non-heavy oil flow less than or equal to 0.1 mD/(mPa · s).
Note. In the vicinity of the reservoir, the organic-bearing source rocks have no natural capacity or natural capacity below the lower limit of commercial oil production, but under certain economic conditions and technical measures
Applied to obtain commercial oil production.
3.2 Overburden matrix permeability
Permeability measured with net overburden pressure without fractured core (matrix).
3.3 Dessert area sweetarea
Source rock, reservoir and engineering mechanics quality configuration is good, through the horizontal well, reservoir reconstruction can obtain the potential value of the development of tight oil distribution range.
4 tight oil geological evaluation
4.1 core sample screening and preparation
4.1.1
coring procedures and well core processing according to SY/T 5336 regulations.
4.1.2
Core sampling density Take 5 to 8 horizontal samples per meter and 2 to 3 vertical samples.
4.1.3
Rock sample preparation according to SY/T 5336 regulations.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34906-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34906-2017
$145.00