GB/T 34860-2017General specification for slotless permanent-magnet motor (English PDF)
无槽永磁电动机通用技术条件
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34860-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 34860-2017 is the English-translated version of 无槽永磁电动机通用技术条件.
GB/T 34860-2017 is the Chinese standard "General specification for slotless permanent-magnet motor". Its scope clause reads: This standard specifies the terms and definitions slotless permanent magnet motor, installation type and basic parameters, technical requirements and test methods, inspection rules Then prepare for delivery.
This standard applies to slotless permanent magnet DC motor, slotless brushless permanent magnet DC motor (excluding drive), slotless permanent magnet synchronous motor (Without driver), the following are referred to as the motor. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 34860-2017
National Standard of the People's Republic of China
- ICS
- 29.160.30
- Classification
- K 24
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 installation type and basic parameters
- 5 Technical requirements and test methods
- 6 Inspection rules
- Appendix A (informative) model name
1 Scope
This standard specifies the terms and definitions slotless permanent magnet motor, installation type and basic parameters, technical requirements and test methods, inspection rules
Then prepare for delivery.
This standard applies to slotless permanent magnet DC motor, slotless brushless permanent magnet DC motor (excluding drive), slotless permanent magnet synchronous motor (Without driver), the following are referred to as the motor.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
Rotating electrical machinery quota and performance GB/T 755-2008
GB/T 1993-1993 rotary motor cooling method
GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Low temperature
GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. High temperature
GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods Test Cab. Constant hot and humid test
GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Db. Alternating hot and humid (12h
12h cycle)
GB/T 2423.5 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and Guidelines Impact
GB/T 2828.1-2012 Sampling procedures for inspection - Part 1 - Batch-by-lot inspection by acceptance quality limit (AQL) plan
GB/T 2900.26 Electrotechnical terminology control motor
GB 4824 Industrial, Scientific and Medical (ISM) RF equipment harassment characteristics limits and measurement methods
GB/T 4942.1 rotary motor overall structure of the protection level (IP code) classification
Basic technical requirements for control of electric motors GB/T 7345-2008
GB/T 7346-2015 control the basic shape and structure of the motor type
GB/T 10069.1 rotary motor noise measurement methods and limits - Part 1. Rotor electrical noise measurement method
GB/T 10405 control motor model nomenclature
GB/T 18211 micro motor safety requirements
3 Terms and definitions
GB/T 2900.26 defined and the following terms and definitions apply to this document.
3.1 Driver
A device that receives an external control signal and/or feedback signal, performs signal processing and power amplification to cause the motor to perform the desired motion, a packet
Contains the control section and the power amplifier section.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34860-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 34860-2017
$295.00