GB/T 34859-2017General specification for brushless resolver (English PDF)
无刷旋转变压器通用技术条件
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34859-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 34859-2017 is the English-translated version of 无刷旋转变压器通用技术条件.
GB/T 34859-2017 is the Chinese standard "General specification for brushless resolver". Its scope clause reads: This standard specifies the brushless resolver classification and the basic parameters, technical requirements and test methods, inspection rules and delivery preparation.
This standard applies to single-pole brushless resolver (hereinafter referred to as "brushless spin-change"). Its clauses include classification and basic parameters.
Found what you need?
Document preview — GB/T 34859-2017
National Standard of the People's Republic of China
- ICS
- 29.160.30
- Classification
- K 24
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 classification and basic parameters
- 3.1 classification
- 3.2 models
- 3.3 Rotation direction and circuit diagram
1 Scope
This standard specifies the brushless resolver classification and the basic parameters, technical requirements and test methods, inspection rules and delivery preparation.
This standard applies to single-pole brushless resolver (hereinafter referred to as "brushless spin-change").
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2423.16 Environmental testing for electric and electronic products Part 2. Test methods Test J and guidelines.
GB/T 2828.1-2012 Sampling procedures for inspection - Part 1 - Batch-by-lot inspection by acceptance quality limit (AQL) plan
Basic technical requirements for control of electric motors GB/T 7345-2008
GB/T 7346 control the basic form of motor structure
GB/T 10405 control motor model nomenclature
JB/T 8162 control motor packaging technology
3 classification and basic parameters
3.1 classification
Brushless resolver is divided into brushless resolver transmitter (XFW) and brushless resolver (XBW).
3.2 models
Brushless spin-change model should be consistent with the provisions of GB/T 10405, from the chassis number, product name code and product serial number of three parts.
Frame number is the product of the base diameter.
Product name code consists of three uppercase Chinese phonetic alphabet.XFW said brushless rotary transmitter, XBW said brushless spin change
Pressure device.
The product serial number is represented by three Arabic numerals.
3.3 Rotation direction and circuit diagram
3.3.1 Rotation direction
Viewed from the shaft extension or mounting end face, the rotor is rotated counterclockwise in the positive direction of rotation. The positive direction of the electrical angle coincides with the positive direction of rotation.
3.3.2 Circuit Diagram and Voltage Equation
XFW brushless rotary transmitter circuit shown in Figure 1, the voltage equation as shown in equation (1) and equation (2) below.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34859-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34859-2017
$295.00