GB/T 34822-2017Determination of formaldehyde in cosmetics—High-performance liquid chromatography (English PDF)
化妆品中甲醛含量的测定 高效液相色谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34822-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 34822-2017 is the English-translated version of 化妆品中甲醛含量的测定 高效液相色谱法.
GB/T 34822-2017 specifies a high-performance liquid chromatographic method for determining free formaldehyde in cosmetics. Clause 1 states that the standard applies to the determination of free formaldehyde in cosmetics and that for this analyte in cosmetics the detection limit is 0.00015% and the limit of quantification 0.0005%.
Clause 3 gives the principle: the cosmetic sample is dispersed in solvent and extracted ultrasonically, the extract is centrifuged, the formaldehyde dissolved in the aqueous phase is separated by liquid chromatography and then reacted after the column with acetylacetone in a post-column derivatisation device, and the derivative is measured with a fluorescence detector, identified by retention time and quantified by the external standard method.
Clause 4 lists the reagents and materials, which are of analytical grade unless stated otherwise, including anhydrous ammonium acetate, glacial acetic acid, acetylacetone kept sealed and dark at 4 degrees Celsius after distillation, anhydrous disodium hydrogen phosphate of not less than 98% purity, phosphoric acid, dichloromethane, butyl acetate and formaldehyde solution; it also prescribes a 0.006 mol/L disodium hydrogen phosphate solution adjusted to pH 2.1 as the mobile phase and a derivatisation reagent that is stored sealed and protected from light.
Clause 4 further notes that each batch of derivatisation reagent requires the standard curve to be calibrated with formaldehyde standard solution, and refers to Table A.1 of Appendix A for the CAS number, English name, molecular formula and relative molecular mass of formaldehyde.
Clause 2 cites GB/T 6682 on specifications and test methods for water used in analytical laboratories. The standard was proposed by the China Light Industry Federation and is administered by the National Technical Committee for Standardization of Fragrances and Cosmetics (SAC/TC 257). It was issued on 1 November 2017 and has applied since 1 May 2018.
Found what you need?
Document preview — GB/T 34822-2017
National Standard of the People's Republic of China
- ICS
- 71.100.70
- Classification
- Y 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Principle
- 4 Reagents and materials
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the determination of free formaldehyde in cosmetics by high performance liquid chromatography.
This standard applies to the determination of free formaldehyde in cosmetics.
This standard for cosmetics free formaldehyde detection limit of 0.00015%, the limit of quantification of 0.0005%.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6682 analytical laboratory water specifications and test methods
3 Principle
Cosmetics samples were solvent dispersed, ultrasonic extraction, after centrifugation, the formaldehyde dissolved in the aqueous phase was separated by liquid chromatography, post-column derivatization
The apparatus reacted with acetylacetone to generate 3,5-diacetyl-1,4-dihydropaluridine, detected by fluorescence detector, characterized by retention time, external standard method Quantitative.
4 Reagents and materials
Unless otherwise indicated, all reagents are of analytical grade, water is a water GB/T 6682 regulations.
4.1 Anhydrous ammonium acetate.
4.2 Glacial acetic acid.
4.3 Acetylacetone. After the distillation at 4 °C sealed dark storage, can be stored for a month.
4.4 Anhydrous sodium hydrogen phosphate purity of not less than 98%.
4.5 Phosphate (>=85%).
4.6 Dichloromethane.
4.7 Butyl acetate.
4.8 Formaldehyde.37% ~ 40%. Formaldehyde CAS number, English name, molecular formula, relative molecular mass see Appendix A of Table A.1.
4.9 0.002mol/L hydrochloric acid solution. Measure 9mL hydrochloric acid (37%), water to volume 1L, and then take this 0.1mol/L hydrochloric acid solution Dilute 50 times with water.
4.10 0.006mol/L disodium hydrogen phosphate solution Weigh 0.852g anhydrous sodium phosphate dibasic (4.4), dissolved in water and transferred to 1L volume The flask was rinsed with water and adjusted to pH = 2.1 with phosphoric acid (4.5) to serve as the mobile phase.
4.11 Derivatization reagent Weigh 62.5g of anhydrous ammonium acetate in 500mL beaker, add appropriate amount of water to dissolve, transfer to 1L volumetric flask. Pipette 7.5mL glacial acetic acid and 5.0mL acetylacetone, with water volume. The derivatization reagent needs to be sealed and protected from light and stored at 25 °C For 4 weeks.
Note: For each formulation of derivatization reagent, calibration of the standard curve with formaldehyde standard solution is required.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 34822-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 34822-2017
$105.00