GB/T 34715-2017Thermoplastic elastomer - Determination of phthalates - Gas chromatography-mass spectrometry (English PDF)
热塑性弹性体 邻苯二甲酸酯类的测定 气相色谱-质谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34715-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 34715-2017 is the English-translated version of 热塑性弹性体 邻苯二甲酸酯类的测定 气相色谱-质谱法.
GB/T 34715-2017 is the Chinese standard "Thermoplastic elastomer - Determination of phthalates - Gas chromatography-mass spectrometry".
Its scope clause reads: This standard specifies the thermoplastic elastomer material DBP, BBP, DEHP, DNOP, DINP and DIDP total of six phthalates Ester plasticizers (see Appendix A for specific names) by gas chromatography-mass spectrometry.
This standard applies to thermoplastic elastomer materials. Its clauses include principle; reagents or materials.
Found what you need?
Document preview — GB/T 34715-2017
National Standard of the People's Republic of China
- ICS
- 83.060
- Classification
- G 40
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 principle
- 4 Reagents or materials
1 Scope
This standard specifies the thermoplastic elastomer material DBP, BBP, DEHP, DNOP, DINP and DIDP total of six phthalates
Ester plasticizers (see Appendix A for specific names) by gas chromatography-mass spectrometry.
This standard applies to thermoplastic elastomer materials.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6682 analytical laboratory water specifications and test methods
GB/T 8170 rounded repair rules and limit values of the representation and judgment
3 principle
Using n-hexane as the extractant, the sample was sonicated and purified by gas chromatography-mass spectrometry (GC-MS)
Analysis, internal standard method.
4 Reagents or materials
Unless otherwise specified, only analytical grade reagents and secondary water according to GB/T 6682 are used in the analysis.
4.1 n-hexane
Chromatographic purity.
4.2
Ethyl acetate n-hexane (8 2, volume ratio).
4.3 Phthalate
Purity not less than 97%, see Appendix A.
4.4 Internal standard
Diamyl phthalate (DAP, CAS Registry No. 131-18-0) with a purity of not less than 97%.
4.5
Standard stock solution Accurately weigh the appropriate amount of phthalate (4.3), respectively, with n-hexane (4.1) formulated DBP, BBP,
DEHP, DNOP concentration of 0.1mg/mL, DINP, DIDP concentration of 0.5mg/mL mixed standard stock solution.
Note. The standard stock solution should be stored in a refrigerator at 0 °C ~ 4 °C, valid for 3 months.
4.6
Internal standard stock solution Accurately weigh an appropriate amount of internal standard (4.4) and use n-hexane to prepare an internal standard stock of DAP at a concentration of 0.25 mg/mL
Solution.
Note. Internal standard stock solution should be stored at 0 °C ~ 4 °C refrigerator, valid for 3 months.
4.7
standard working solution Take 0.2mL ~ 5mL standard stock solution (4.5) to 50mL volumetric flask, were added 0.5mL of
Internal standard stock solution (4.6) Prepare a set of standard working solutions (DBP, BBP, DEHP, DNOP) with n-hexane (4.1)
At least 5 standard working solutions with concentration of 0.4µg/mL ~ 10µg/mL, DINP, DIDP concentration of 2µg/mL ~ 50µg/mL […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34715-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34715-2017
$145.00