Valid

GB/T 34706-2017Determination of organotins content in coatings - Gas chromatography/mass spectrometry method (English PDF)

涂料中有机锡含量的测定 气质联用法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34706-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 1, 2017

Implementation date

May 1, 2018

Scope

GB/T 34706-2017 is the English-translated version of 涂料中有机锡含量的测定 气质联用法.

GB/T 34706-2017 is the Chinese standard "Determination of organotins content in coatings - Gas chromatography/mass spectrometry method".

Its scope clause reads: This standard specifies the principle of GC-MS determination of organic tin content and soluble organic tin content, reagents, equipment And materials, samples, test procedures, test data processing, detection limits and precision.

This standard applies to the determination of organic tin content in coatings, including but not limited to the cited organic tin, such as monomethyltin (MeT), dipropyl (DProT), monobutyltin (MBT), dibutyltin (DBT), tributyltin (TBT), tetrabutyltin (TeBT), octyltin (MOT), dioctyltin (DOT), diphenyltin (DPHT), triphenyltin (TPHT) and the like.

Determination of organic tin content in coatings raw materials Can refer to this standard. Its clauses include principle; reagent.

Found what you need?

Document preview — GB/T 34706-2017

National Standard of the People's Republic of China

ICS
87.040
Classification
G 50

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 principle
  • 4 reagent

1 Scope

This standard specifies the principle of GC-MS determination of organic tin content and soluble organic tin content, reagents, equipment

And materials, samples, test procedures, test data processing, detection limits and precision.

This standard applies to the determination of organic tin content in coatings, including but not limited to the cited organic tin, such as monomethyltin (MeT), dipropyl (DProT), monobutyltin (MBT), dibutyltin (DBT), tributyltin (TBT), tetrabutyltin (TeBT), octyltin (MOT), dioctyltin (DOT), diphenyltin (DPHT), triphenyltin (TPHT) and the like. Determination of organic tin content in coatings raw materials

Can refer to this standard.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 3186 Paints, varnishes and varnish and varnish raw materials sampling

Laboratory use specifications and test methods for analysis GB/T 6682-2008

GB/T 12808 laboratory glassware single standard pipette

3 principle

3.1 Determination of organic tin content in the coating principle

With ethyl acetate and other solvents as the extraction solvent, ultrasonic extraction of organotin in the sample. In the extract, add acetic acid - sodium acetate buffer

Solution, sodium tetraethyl borate as a derivatization reagent, the organic tin in the extract was derivatized with n-hexane extraction of the organic extract

Tin derivatives were detected by gas chromatography-mass spectrometry (GC/MS).

3.2 Determination of soluble organic tin coating principle

The sample is made into a coating film according to the product regulations, and the soluble organotin in the coating film is extracted with 0.07mol/L hydrochloric acid solution. In the extract,

Acetic acid - sodium acetate buffer solution was added to the sodium tetraethylborate as a derivatization reagent, the organic tin in the extract was derivatized with n-hexane

The organotin derivatives were extracted from the extract and detected by gas chromatography-mass spectrometry (GC/MS).

4 reagent

Caution --- Sodium tetraethyl borate is flammable. For the safe operation of sodium tetraethyl borate, please refer to the relevant chemical safety manual or supplier

Safety warning instructions.

Unless otherwise specified, only the reagents identified as analytical grade and above are used in the analysis and the requirements of GB/T 6682-2008

A level of water.

4.1

Sodium tetraethyl borate (NaBEt4) content >= 98% (mass fraction).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34706-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34706-2017

$145.00