GB/T 34699-2017Test method of physical properties for low temperature sulphur tail gas hydrogenation catalyst (English PDF)
低温硫磺尾气加氢催化剂物理性能试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34699-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 34699-2017 is the English-translated version of 低温硫磺尾气加氢催化剂物理性能试验方法.
GB/T 34699-2017 is the Chinese standard "Test method of physical properties for low temperature sulphur tail gas hydrogenation catalyst".
Its scope clause reads: This standard specifies the low temperature sulfur tail gas hydrogenation catalyst bulk density, particle radial crushing force, wear rate and specific surface area, pore Volume, the average pore diameter determination method.
This standard applies to hydrogen sulphide acid gas as raw materials Claus sulfur recovery process to cobalt, molybdenum, nickel as the main active ingredient to Alumina, titanium dioxide as a carrier of low temperature sulfur tail gas hydrogenation catalyst. Its clauses include samples; determination of bulk density.
Found what you need?
Document preview — GB/T 34699-2017
National Standard of the People's Republic of China
- ICS
- 71.100.99
- Classification
- G 74
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 samples
- 4 Determination of bulk density
1 Scope
This standard specifies the low temperature sulfur tail gas hydrogenation catalyst bulk density, particle radial crushing force, wear rate and specific surface area, pore
Volume, the average pore diameter determination method.
This standard applies to hydrogen sulphide acid gas as raw materials Claus sulfur recovery process to cobalt, molybdenum, nickel as the main active ingredient to
Alumina, titanium dioxide as a carrier of low temperature sulfur tail gas hydrogenation catalyst.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6003.1 Test sieves - Technical requirements and testing - Part 1. Wire mesh sieve test sieves
GB/T 6678 General rules for sampling chemical products
3 samples
3.1 Laboratory samples
According to the provisions of GB/T 6678 made.
3.2 Sample
Take appropriate laboratory samples, with a pore size of phi2.0mm test sieve (in accordance with GB/T 6003.1 in the R40/3 series) to remove dust, broken
Tablets, placed in an oven, dried at 120 °C ± 5 °C 2h, removed and placed in a desiccator cooled to room temperature. stand-by.
4 Determination of bulk density
4.1 Sample accumulation
Take appropriate catalyst sample, divided into several copies, followed by adding 250mL graduated cylinder. Each time it is added, the cylinder should be vibrated up and down a number
Times, until the position of the sample in the cylinder does not become a tap, repeated operation until the amount of the sample is 100mL.
4.2 Sample Weighing
The mass of the 100 mL sample was weighed to the nearest 0.1 g.
4.3 Calculation of bulk density
Catalyst bulk density rho, the value in grams per milliliter (g/mL), according to equation (1) calculation.
rho = m2-m1 (1) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34699-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34699-2017
$150.00