GB/T 34552-2017Municipal solid waste fluidized bed incineration boiler (English PDF)
生活垃圾流化床焚烧锅炉
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34552-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2017
Implementation date
September 1, 2018
Scope
GB/T 34552-2017 is the English-translated version of 生活垃圾流化床焚烧锅炉.
GB/T 34552-2017 is the Chinese standard "Municipal solid waste fluidized bed incineration boiler".
Its scope clause reads: This standard specifies the life garbage fluidized bed incineration boiler terms and definitions, classification and type, into the rubbish requirements, technical requirements, inspection And inspection, paint, packaging, marking and factory information, installation, testing and acceptance of technical requirements.
This standard applies to the living garbage as a fuel (including auxiliary coal quality accounted for no more than 20%) of the fluidized bed combustion equipment. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 34552-2017
National Standard of the People's Republic of China
- ICS
- 27.060.01
- Classification
- J 98
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 classification and model
- 5 into the garbage requirements
- 6 Technical Requirements
- 7 inspection and inspection
- 8 paint, packaging, marking and factory information
- 9 Install
- 10 test and acceptance
1 Scope
This standard specifies the life garbage fluidized bed incineration boiler terms and definitions, classification and type, into the rubbish requirements, technical requirements, inspection
And inspection, paint, packaging, marking and factory information, installation, testing and acceptance of technical requirements.
This standard applies to the living garbage as a fuel (including auxiliary coal quality accounted for no more than 20%) of the fluidized bed combustion equipment.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6414 casting dimensional tolerances and machining allowance
GB/T 10184 boiler performance test procedures
GB/T 12145 thermal power units and steam power equipment water vapor quality
GB/T 16507.2 Water tube boilers - Part 2. Materials
GB/T 16507.5 Water tube boilers - Part 5. Manufacture
Water boiler GB/T 16507.6 Part 6. Inspection, testing and acceptance
GB 18485 Domestic Waste Incineration Pollution Control Standard
GB/T 23294 wear refractory
CJ/T 313 Garbage sampling and analysis methods
DL5190.2 Technical specification for electric power construction Part 2. Boiler unit
JB/T 1615 boiler paint and packaging technology conditions
NB/T 47043 boiler steel structure manufacturing technical specifications
NB/T 47049 tubular air preheater manufacturing technical conditions
TSGG0001 boiler safety technology supervision regulations
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Fluidized bed
When the air passes through the layer of solid particulate material laying on the fixed bed from bottom to top and the gas velocity reaches or exceeds the critical flow of particles
When the speed, the particles in the material layer is tumbling up and down the fluidized state.
3.2 Bubbling fluidized bed
The characteristics of the bubbling fluidized bed are that when the gas-solid fluidized bed gas velocity exceeds the critical fluidized gas velocity, the fluid begins to fluidize, the bubbles in the bed appear, and the gas
Two regions apparently appear, namely, the dense phase zone where particles gather and the bubble-dominated dilute zone.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34552-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 34552-2017
$145.00