GB/T 34495-2017Hot pressed neodymium iron boron permanent magnetic materials (English PDF)
热压钕铁硼永磁材料
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34495-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2017
Implementation date
May 1, 2018
Scope
GB/T 34495-2017 is the English-translated version of 热压钕铁硼永磁材料.
GB/T 34495-2017 is the Chinese standard "Hot pressed neodymium iron boron permanent magnetic materials".
Its scope clause reads: This standard specifies the classification of hot-pressed NdFeB permanent magnetic materials and grades, requirements, test methods, inspection rules and packaging, marking, transportation, storage Save and quality certificate.
This standard applies to isotropic hot NdFeB permanent magnetic materials, anisotropic hot NdFeB permanent magnet materials, mainly for aerospace, High-end CNC machine tools and robots, advanced rail transportation equipment, energy-saving and new energy vehicles, modern weapons and appliances, and other fields. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 34495-2017
National Standard of the People's Republic of China
- ICS
- 77.120.99
- Classification
- H 65
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Categories and grades
- 4.1 Classification
- 4.2 grades that method
- 5 Requirements
- 5.1 Magnetic performance
- 5.3 size, shape and tolerance
- 5.4 Appearance quality
- 6 test method
- 6.1 Magnetic performance
- 6.2 Surface magnetic flux density (ie, surface magnetic field strength) and air gap magnetic flux density unevenness
- 6.3 Dimensions, shape and tolerances
- 6.4 Appearance Quality
- 7 inspection rules
- 7.1 Delivery Status
- 7.2 inspection and acceptance
- 7.3 Batch
- 7.4 test items
- 7.5 Sampling and sample preparation
- 7.6 test results to determine
- 8 packaging, marking, transport, storage and quality certificate
- 8.1 packaging, logo
- 8.2 Transport, storage
- 8.3 Quality Certificate
- Appendix A (informative) Preparation of hot-pressed NdFeB permanent magnetic materials and raw materials ratio
- Appendix C (Informative) Hot NdFeB permanent magnet material unit system and conversion table
1 Scope
This standard specifies the classification of hot-pressed NdFeB permanent magnetic materials and grades, requirements, test methods, inspection rules and packaging, marking, transportation, storage
Save and quality certificate.
This standard applies to isotropic hot NdFeB permanent magnetic materials, anisotropic hot NdFeB permanent magnet materials, mainly for aerospace,
High-end CNC machine tools and robots, advanced rail transportation equipment, energy-saving and new energy vehicles, modern weapons and appliances, and other fields.
2 Normative references
The following documents for the application of this document is essential. Any reference to the date of the reference document. The date-only version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1182 Geometrical product specifications (GPS) Geometrical tolerances Shape, orientation, position and runout tolerances Marking
GB/T 2828.1 Sampling procedures for sampling inspection - Part 1. Batch inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 3217 permanent magnet (hard magnetic) material magnetic test methods
GB/T 9637 Electrotechnical terminology magnetic materials and components
GB/T 15676 rare earth terminology
GB/T 17803 rare earth product grades that method
GB/T 31967.1 Methods of testing physical properties of rare earth permanent magnetic materials - Part 1 Determination of temperature characteristics of magnetic flux
GB/T 31967.2 Methods of testing physical properties of rare earth permanent magnetic materials - Part 2. Determination of flexural strength and fracture toughness
3 Terms and definitions
GB/T 9637 and GB/T 15676 define the following terms and definitions apply to this document. For ease of use, repeat below
Listed in GB/T 9637 and GB/T 15676 some of the terms and definitions.
3.1 Neodymium iron boron permanent magnet material (Nd-Fe-B)
Nd2Fe14B phase as the main phase of the permanent magnet material, which Nd content of the total mass percentage of rare earth maximum.
3.2 Hot-pressed rare earth permanent magnet
The use of low temperature, short-time hot-pressing process, rare earth permanent magnet alloy powder after hot pressing or hot-pressing - thermal rheological molding process of permanent magnets. system
Preparation of raw materials and ingredients ratio see Appendix A.
3.3 The main magnetic properties of principalmagneticproperties
Mainly include remanence Br of permanent magnetic materials, magnetic coercive force (intrinsic coercive force) HcJ, magnetic induction coercive force HcB, maximum
Magnetic energy product (BH) max.
3.4 Auxiliary magnetic properties
Including permanent magnetic material relative recovery permeability µrec, remanence temperature coefficient alpha (Br), magnetic polarization coercivity (intrinsic coercivity) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34495-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34495-2017
$235.00