GB/T 34485-2017Method of ultrasonic inspection for wrought zirconium and zirconium alloy products (English PDF)
锆及锆合金加工产品超声波检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34485-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2017
Implementation date
May 1, 2018
Scope
GB/T 34485-2017 is the English-translated version of 锆及锆合金加工产品超声波检测方法.
GB/T 34485-2017 is the Chinese standard "Method of ultrasonic inspection for wrought zirconium and zirconium alloy products".
Its scope clause reads: This standard specifies the zirconium and zirconium alloy products for ultrasonic testing requirements, testing equipment, contrast test block, the sensitivity of debugging, Cheng Order, acceptance, record and report.
This standard applies to the cross-sectional thickness of 5mm ~.200mm zirconium and zirconium alloy products ultrasonic testing. Its clauses include detection principle; requirements; testing equipment.
Found what you need?
Document preview — GB/T 34485-2017
National Standard of the People's Republic of China
- ICS
- 77.040.20
- Classification
- H 26
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 detection principle
- 4 requirements
- 5 testing equipment
1 Scope
This standard specifies the zirconium and zirconium alloy products for ultrasonic testing requirements, testing equipment, contrast test block, the sensitivity of debugging, Cheng
Order, acceptance, record and report.
This standard applies to the cross-sectional thickness of 5mm ~.200mm zirconium and zirconium alloy products ultrasonic testing.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 9445 non-destructive testing personnel qualification and certification
JB/T 10061 A pulse reflection ultrasonic flaw detector general technical conditions
3 detection principle
Ultrasound generated by the sound source into the seized product to a certain direction and speed of the spread, the acoustic impedance on both sides have a different interface
When part of the sound waves are reflected, the reflected ultrasonic waves are received and processed by the detection equipment and analyzed to evaluate whether the products under inspection
The existence of defects and the characteristics of defects.
4 requirements
4.1 staff
Personnel engaged in ultrasonic testing should have the necessary business knowledge, and according to GB/T 9445 or equivalent to obtain grade I or above
Ultrasound qualification certificate, issued and interpretation of ultrasonic testing report should obtain grade II or above ultrasonic qualification certificate.
4.2 Method Categories
Usually using longitudinal wave detection, both sides can increase the cross-wave. P-wave or shear wave detection, immersion method or contact method
Can be used.
4.3 product surface
The surface of the product to be inspected shall be clean and free of dirt, grease, metal scraps and other foreign substances that will prevent the test. Ra roughness is not
Greater than 3.2µm (to meet the ultrasonic test requirements).
5 testing equipment
5.1 flaw detector
Ultrasonic flaw detector to generate, receive and display to meet the frequency and energy requirements of high-frequency electrical pulse, at least in the 2MHz ~ […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34485-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34485-2017
$145.00