Valid

GB/T 34472-2017General technical requirements of stainless steel for building curtain wall (English PDF)

建筑幕墙用不锈钢通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34472-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 14, 2017

Implementation date

July 1, 2018

Scope

GB/T 34472-2017 is the English-translated version of 建筑幕墙用不锈钢通用技术条件.

GB/T 34472-2017 is the Chinese standard "General technical requirements of stainless steel for building curtain wall". Its scope clause reads: This standard specifies the terms and definitions stainless steel curtain wall, classification, ordering content, requirements, test methods, inspection rules, packaging, Logo and quality certificate.

This standard applies to the construction of curtain wall with stainless steel, including a variety of thermoformed or cold-formed steel (with), steel, steel bars, wire, wire rope, Strand and castings (hereinafter referred to as stainless steel).

Found what you need?

Document preview — GB/T 34472-2017

National Standard of the People's Republic of China

ICS
77.140.20
Classification
H 40

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Categories
  • 5 order content
  • 6 Requirements
  • 7 test method
  • 8 inspection rules
  • 9 packaging, marking and quality certificate
  • Appendix A (Informative) Recommended features and uses of stainless steel grades for building curtain wall
  • Appendix B (Informative Appendix) Recommended stainless steel curtain wall domestic and foreign brands table
  • References

1 Scope

This standard specifies the terms and definitions stainless steel curtain wall, classification, ordering content, requirements, test methods, inspection rules, packaging,

Logo and quality certificate.

This standard applies to the construction of curtain wall with stainless steel, including a variety of thermoformed or cold-formed steel (with), steel, steel bars, wire, wire rope,

Strand and castings (hereinafter referred to as stainless steel).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 226 low magnification organizations and defects acid corrosion test

GB/T 228.1 tensile testing of metallic materials - Part 1. room temperature test method

GB/T 230.1 Metallic materials Rockwell hardness test Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T scale)

GB/T 231.1 Brinell hardness test of metallic materials - Part 1. Test methods

GB/T 232 Metallic materials - Bending test methods

GB/T 247 steel sheet and strip packaging, marking and quality certificate of the general provisions

GB/T 1220 stainless steel rod

GB/T 1979 structural steel microstructure defects rating chart

GB/T 2100 general purpose corrosion resistant steel castings

GB/T 2101 steel acceptance, packaging, marking and quality certificate of the general provisions

GB/T 2102 acceptance of steel pipe, packaging, marking and quality certificate

GB/T 2103 wire acceptance, packaging, marking and quality certificate of the general provisions

GB/T 2104 wire rope packaging, marking and quality certificate of the general provisions

GB/T 2975 steel and steel products mechanical properties test sampling location and sample preparation

GB/T 2976 metal wire winding test method

GB/T 3280-2015 stainless steel cold rolled steel sheet and strip

GB/T 4226 stainless steel cold-worked rod

GB/T 4232 cold forged stainless steel wire

GB/T 4237-2015 stainless steel hot-rolled steel sheet and strip

GB/T 4240 stainless steel wire

GB/T 4340.1 Vickers hardness test of metallic materials - Part 1. Test methods

GB/T 5677 castings radiographic testing

GB/T 7736 low magnification microstructure and ultrasonic examination of defects

GB/T 8358 wire rope breaking strength measurement method

Stainless steel wire rope GB/T 9944-2015

GB/T 13305 stainless steel alpha-phase area content metallographic determination

GB/T 14975 stainless steel seamless pipe structure

GB/T 15574 steel product classification […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34472-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34472-2017

$235.00