GB/T 34452-2017Performance requirements of portable LED luminaires for general lighting (English PDF)
可移式通用LED灯具性能要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34452-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2017
Implementation date
May 1, 2018
Scope
GB/T 34452-2017 is the English-translated version of 可移式通用LED灯具性能要求.
GB/T 34452-2017 is the Chinese standard "Performance requirements of portable LED luminaires for general lighting". Its scope clause reads: This standard specifies the performance requirements of portable LED luminaires for general lighting (hereinafter referred to as luminaires).
This standard is applicable to the portable luminaires for general lighting with LED light source.
Luminaires are put into the following types: Type A - luminaires with the LED modules indicated to be in accordance with IEC 62717; Type B - luminaires with the LED modules not indicated to be in accordance with IEC 62717; Type C - luminaires with LED light in accordance with GB/T 31897.1-2015.
The requirements of this standard only involves type test. This standard does not involve Type C luminaires. This standard involves neither LED luminaires generating only color light nor luminaires with only OLED (organic LED).
Unless the standard specifies alternative measurement methods or limits, these performance requirements are supplementary to Chapter 1 to Chapter 9 of GB/T 31897.1-2015.
Its clauses include terms and definitions; classification; product information; general requirements; test conditions.
Found what you need?
Document preview — GB/T 34452-2017
National Standard of the People's Republic of China
- ICS
- 29.140.40
- Classification
- K 72
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword i
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Classification
- 5 Product Information
- 6 General Requirements
- 7 Test Conditions
- 8 Input Power
- 9 Light Output
- 10 Color Coordinate, Correlated Color Temperature and Color Rendering Index
- 11 Service Life of Luminaires
- 12 Sample Quantity
1 Scope
This standard specifies the performance requirements of portable LED luminaires for general lighting (hereinafter referred to as luminaires).
This standard is applicable to the portable luminaires for general lighting with LED light source.
Luminaires are put into the following types:
Type A - luminaires with the LED modules indicated to be in accordance with IEC 62717;
Type B - luminaires with the LED modules not indicated to be in accordance with IEC 62717;
Type C - luminaires with LED light in accordance with GB/T 31897.1-2015.
The requirements of this standard only involves type test.
This standard does not involve Type C luminaires.
This standard involves neither LED luminaires generating only color light nor luminaires with only OLED (organic LED).
Unless the standard specifies alternative measurement methods or limits, these performance requirements are supplementary to Chapter 1 to Chapter 9 of GB/T 31897.1-2015.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 7000.204 Luminaires - Part 2-4: Particular Requirements - Portable General Purpose Luminaires
GB/T 9473 Performance Requirements for Table Lamps for Paper Task
GB 17625.1 Electromagnetic Compatibility - Limits - Limits for Harmonic Current Emissions (Equipment Input Current<=16A per Phase)
GB/T 17743 Limits and Methods of Measurement of Radio Disturbance Characteristics of Electrical Lighting and Similar Equipment
GB/T 18595 Equipment for General Lighting Purposes - EMC Immunity Requirements
GB/T 31897.1-2015 Luminaire Performance - Part 1: General Requirements
GB/T 31897.201-2016 Luminaire Performance - Part 2-1: Particular Requirements for LED Luminaires
IEC 62717 LED modules for general lighting - Performance requirements
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB 7000.204, GB/T 9473, GB/T 31897.1-2015 and GB/T 31897.201-2016 and the following apply.
3.1 portable LED luminaires
Luminaires that contain one or multiple LED light sources and can be moved from one place to another in normal service condition connected to power supply.
Notes:
1: wall-mounted luminaires with power lines connected to the plugs, which can be fixed to their supports with thumb screws, steel clips or hooks and easily removed from the supports by hand, are considered as portable luminaires.
2: portable LED luminaires for general lighting can be exemplified as table lamps, floor lamps and clip lamps using LED light sources.
4 Classification
Luminaires may be classified into indoor luminaires and outdoor ones according to the service places.
5 Product Information
5.1
In accordance with the requirements of Chapter 4 in GB/T 31897.201-2016.
5.2
The manufacturer or responsible distributor shall provide description of service place and installation mode of luminaires on product data sheets, printed matters, or web pages.
6 General Requirements
6.1
The design and structure of luminaires shall enable them to work safely in normal service, without any danger to people or surrounding environment, and to meet their claimed performance indexes, with reliable function in normal service. Generally, qualification shall be inspected with all specified tests.
6.2
Luminaires shall meet the requirements of GB 7000.204, GB/T 17743, GB 17625.1 and GB/T 18595.
7 Test Conditions
7.1 General test conditions
In accordance with the requirements of 6.1 in GB/T 31897.201-2016.
7.2
Luminaires with the LED modules indicated to be in accordance with IEC 62717 (Type A)
In accordance with the requirements of 6.2 in GB/T 31897.201-2016.
7.3
Luminaires with the LED modules not indicated to be in accordance with IEC 62717 (Type B)
In accordance with the requirements of 6.3 in GB/T 31897.201-2016.
7.4 Performance requirements
Performance requirements given in Table 1 are applicable to Type A and Type B luminaires. All the n tested luminaires shall meet the performance requirements.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34452-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34452-2017
$115.00