GB/T 34442-2017Pulps—Determination of fiber coarseness—Unpolarized light method (English PDF)
纸浆 纤维粗度的测定 非偏振光方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34442-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2017
Implementation date
May 1, 2018
Scope
GB/T 34442-2017 is the English-translated version of 纸浆 纤维粗度的测定 非偏振光方法.
GB/T 34442-2017 is the Chinese standard "Pulps—Determination of fiber coarseness—Unpolarized light method". Its scope clause reads: This standard specifies the use of non-polarized light determination of fiber thickness method.
This standard applies to the determination of fiber length less than 7.5mm chemical pulp, fiber length less than 0.2mm not included in the calculation results. Its clauses include terms and definitions; principle; equipment and materials.
Found what you need?
Document preview — GB/T 34442-2017
National Standard of the People's Republic of China
- ICS
- 85.010
- Classification
- Y 30
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 principle
- 5 Equipment and Materials
1 Scope
This standard specifies the use of non-polarized light determination of fiber thickness method.
This standard applies to the determination of fiber length less than 7.5mm chemical pulp, fiber length less than 0.2mm not included in the calculation results.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 462 paper, cardboard and pulp analysis of moisture samples
GB/T 740 pulp sample taken
GB/T 5399 Determination of pulp slurry concentration
GB/T 22903 standard test for pulp and paper physics
GB/T 24324 Preparation of paper for laboratory tests of pulp physics - Conventional paper sheet former method
GB/T 24327 Pulp Laboratory Wet Dissociation Chemical pulp dissociation
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Fiber roughness fibercoarseness
The mass per unit length of a particular fiber (absolutely dry).
3.2 Unpolarizedlight unpolarized
The vibration surface of the light is randomly arranged light.
4 principle
A certain amount of fiber suspension is passed through a fiber orientation chamber with a two-dimensional space and a single fiber skeleton is imaged using non-polarized light technology
Like scanning, get the actual length of each fiber. The actual total length of the measured fiber is calculated by dividing the total mass of the fiber measured by the total length of the fiber
Degrees, we get the average roughness of the fiber.
5 Equipment and Materials
5.1 fiber quality analyzer
5.1.1
by the Ministry of measurement and sample delivery system. The measurement department consists of a LED light source, a measuring cell and a digital CCD camera (eg
Figure 1); sample delivery system using vacuum suction sample, during the test, the sample has been in a vacuum state, to avoid the presence of empty samples
Impact of gas on test results.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34442-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34442-2017
$85.00