GB/T 34424-2017Fixed equivalent water-based fire-extinguishing systems for ship (English PDF)
船舶固定式等效水基灭火系统
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34424-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2017
Implementation date
May 1, 2018
Scope
GB/T 34424-2017 is the English-translated version of 船舶固定式等效水基灭火系统.
GB/T 34424-2017 is the Chinese standard "Fixed equivalent water-based fire-extinguishing systems for ship".
Its scope clause reads: This standard specifies the ship fixed equivalent water-based fire extinguishing system (hereinafter referred to as fire extinguishing system) design and structure, requirements, test methods, seized Inspection rules and signs, packaging, transportation, storage and so on.
This standard applies to the machinery spaces and cargo pump room, ro-ro premises and special office fire extinguishing system design, manufacture, installation and acceptance. Its clauses include terms and definitions; design and structure.
Found what you need?
Document preview — GB/T 34424-2017
National Standard of the People's Republic of China
- ICS
- 47.020.50
- Classification
- U 23
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Design and structure
- 4.1 General
- 4.2 Machinery spaces and cargo pump room
- 4.3 Ro-ro premises and special premises
- 5 Requirements
- 5.1 appearance
- 5.2 Protection
- 5.3 Machinery spaces and cargo pump rooms
- 5.4 Ro-ro premises and special premises
- 6 test method
- 6.1 Appearance
- 6.2 Protection
- 6.3 Machine room and cargo pump fire test
- 6.4 Ro-Ro premises and special premises fire test
- 7 Inspection rules
- 7.1 Test classification
- 7.2 type test
- 7.3 factory inspection
- 8 logo, packaging, transportation and storage
- 8.1 mark
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
1 Scope
This standard specifies the ship fixed equivalent water-based fire extinguishing system (hereinafter referred to as fire extinguishing system) design and structure, requirements, test methods, seized
Inspection rules and signs, packaging, transportation, storage and so on.
This standard applies to the machinery spaces and cargo pump room, ro-ro premises and special office fire extinguishing system design, manufacture, installation and acceptance.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 4208-2017 enclosure rating (IP code)
GB/T 9969 Industrial Products Manual General
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Fire extinguishing
Through the direct use of a sufficient amount of fire extinguishing agent to reduce the rate of fire heat release, completely extinguished the flame, eliminating the hot part of the process.
3.2 Water-based fire extinguishing agent
Fresh or sea water with or without additives to enhance fire-fighting capabilities.
3.3 Specialspace
For the carriage of fuel-carrying vehicles in the fuel tank, and such vehicles can be driven in and out, passengers also have accessible access to the bulkhead deck above
Or below the enclosed premises.
Note. Where the total net height of a loaded vehicle does not exceed 10 m, the special category may include multiple decks.
4 Design and structure
General 4.1
4.1.1 Startup requirements
Fire extinguishing system should be able to start immediately, fire extinguishing system water supply should not be delayed.
4.1.2 operating requirements
4.1.2.1
Fire extinguishing systems and their components shall be capable of withstanding the normal ambient temperature changes, vibrations, humidity, impacts, impacts, obstructions and corrosion of the ship […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34424-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34424-2017
$235.00