Valid

GB/T 34337-2017Photovoltaic vacuum glass (English PDF)

光伏真空玻璃

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34337-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 14, 2017

Implementation date

September 1, 2018

Scope

GB/T 34337-2017 is the English-translated version of 光伏真空玻璃.

GB/T 34337-2017 is the Chinese standard "Photovoltaic vacuum glass". Its scope clause reads: This standard specifies the terms and definitions of photovoltaic glass vacuum, classification, requirements, test methods, inspection rules, packaging, marking, transportation and Storage.

This standard applies to composite solar cells, with photovoltaic power generation vacuum glass. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 34337-2017

National Standard of the People's Republic of China

ICS
81.040.30
Classification
Q 37

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Categories
  • 5 technical requirements
  • 5.1 appearance quality
  • 5.2 size and deviation
  • 5.3 Bending
  • 5.4 Insulation performance (K value)
  • 5.5 maximum power
  • 5.6 Insulation performance
  • 5.7 outdoor exposure performance
  • 5.8 hot spot durability
  • 5.9 UV resistance (UV) performance
  • 5.10 heat cycle performance
  • 5.11 resistance to wetting performance
  • 5.12 resistance to heat and humidity
  • 5.13 Lead strength
  • 5.14 wet leakage current
  • 5.15 resistance to static mechanical load performance
  • 5.16 resistance to dynamic mechanical load performance
  • 5.17 hail impact performance
  • 5.18 bypass diode thermal performance
  • 5.19 light aging performance
  • 6 test method
  • 6.1 Test conditions
  • 6.2 appearance quality
  • 6.3 Size and deviation
  • 6.4 Curvature
  • 6.5 Insulation performance (K value)
  • 6.6 maximum power
  • 6.7 Insulation performance
  • 6.8 outdoor exposure performance
  • 6.9 hot spot durability
  • 6.10 UV resistance (performance)
  • 6.11 heat cycle performance
  • 6.12 resistance to wetting performance
  • 6.13 resistance to hot and humid performance
  • 6.14 Lead strength
  • 6.15 wet leakage current
  • 6.16 resistance to static mechanical load performance
  • 6.17 resistance to dynamic mechanical load performance
  • 6.18 hail impact performance
  • 6.19 bypass diode thermal performance
  • 6.20 light aging performance
  • 7 inspection rules
  • 7.1 Inspection Classification
  • 7.2 Batch and Sampling
  • 7.3 Decision rules
  • 8 logo, packaging, transportation and storage
  • 8.1 mark
  • 8.2 Packaging
  • 8.3 Transport
  • 8.4 Storage
  • Appendix A (Normative) Type test procedures

1 Scope

This standard specifies the terms and definitions of photovoltaic glass vacuum, classification, requirements, test methods, inspection rules, packaging, marking, transportation and

Storage.

This standard applies to composite solar cells, with photovoltaic power generation vacuum glass.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

Outside diameter micrometer

GB/T 8484 building exterior doors and windows insulation performance classification and testing methods

GB/T 9056-2004 metal ruler

GB/T 22523-2008 feeler

IEC 61215.2005 Design and characterization of terrestrial crystalline silicon photovoltaic modules [Crystalinesiliconterrestrialphoto- voltaic (PV) modules-Designqualificationandtypeapproval]

IEC 61646.2008 Design and qualification of thin-film photovoltaic modules for use on the ground [Thin-film terrestrial phothotovoltaic (PV) modules-Designqualificationandtypeapproval]

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Vacuum glass vacummglass

Two or more than two sheets of glass separated by a support, the surrounding sealed in the glass to form a vacuum layer of glass products.

3.2 Protective cap

Made of metal or organic materials made of vacuum glass attached to the exhaust port protection device.

3.3 Support pilar

Inorganic materials that act as skeleton supports in vacuum glazing.

3.4

Composite solar cells, with photovoltaic power generation of vacuum glass.

3.5 Crystal silicon cell type photovoltaic glass vacuum

Photovoltaic glass solar cell type is crystalline silicon.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34337-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34337-2017

$235.00