GB/T 34220-2017Refractory Products—Determination of tensile strength at elevated temperature (English PDF)
耐火材料 高温抗拉强度试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34220-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 7, 2017
Implementation date
August 1, 2018
Scope
GB/T 34220-2017 is the English-translated version of 耐火材料 高温抗拉强度试验方法.
GB/T 34220-2017 is the Chinese standard "Refractory Products—Determination of tensile strength at elevated temperature".
Its scope clause reads: This standard specifies the terms and definitions of refractory high temperature tensile strength test methods, principles, equipment, samples, test procedures, the results of the meter Calculate and test report.
This standard applies to the determination of high temperature tensile strength of refractory materials. Its clauses include terms and definitions; principle; device.
Found what you need?
Document preview — GB/T 34220-2017
National Standard of the People's Republic of China
- ICS
- 81.080
- Classification
- Q 40
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 principle
- 5 device
1 Scope
This standard specifies the terms and definitions of refractory high temperature tensile strength test methods, principles, equipment, samples, test procedures, the results of the meter
Calculate and test report.
This standard applies to the determination of high temperature tensile strength of refractory materials.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 7321 shaped refractory products sample preparation method
GB/T 8170 rounded repair rules and limit values of the representation and judgment
GB/T 10325 Shaped refractory products acceptance inspection sampling rules
GB/T 17617 refractory raw materials and amorphous refractory samples
GB/T 18930 refractories terminology
YB/T 5202.1 amorphous refractory sample preparation methods - Part 1 refractory castables
3 Terms and definitions
GB/T 18930 defined and the following terms and definitions apply to this document.
3.1 High temperature tensile strength
At high temperatures, the refractory material according to the provisions of the conditions of stretching, damage occurred before the unit area can withstand the ultimate tensile strength.
4 principle
Under high temperature conditions, the provisions of the size of the sample at a constant rate of tension until fracture, according to the maximum tensile specimen
Strength and cross-sectional area to calculate the high temperature tensile strength.
5 device
5.1
Tensile testing machine, showing the error within ± 2%. Tester shall be able to exert tensile stress at a rate of (0.15 ± 0.015) MPa/s,
Until the specimen is broken.
Sample fixture should meet the following requirements.
a) Fixtures should withstand high temperatures under test conditions;
b) upper and lower clamps should be able to ensure that the sample holding the coaxiality;
c) The contact surface width with the sample is not less than 10mm.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34220-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34220-2017
$85.00