GB/T 34115-2017General specification for permanent magnet linear motor (English PDF)
永磁式直线电动机通用技术条件
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34115-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 31, 2017
Implementation date
February 1, 2018
Scope
GB/T 34115-2017 is the English-translated version of 永磁式直线电动机通用技术条件.
GB/T 34115-2017 is the Chinese standard "General specification for permanent magnet linear motor".
Its scope clause reads: This standard specifies the terms and definitions of permanent magnet linear motor, classification, technical requirements and test methods, inspection rules, delivery preparation and User service This standard applies to permanent magnet linear motors (hereinafter referred to as "motor"), other linear motors can also refer to the use.
Found what you need?
Document preview — GB/T 34115-2017
National Standard of the People's Republic of China
- ICS
- 29.160.30
- Classification
- K 24
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Categories
- 5 Technical requirements and test methods
- 6 Inspection rules
- 7 Delivery Preparation
- 8 user service
- Appendix A (informative) model name
- Appendix B (Normative) Thermal resistance and thermal time constant test method
1 Scope
This standard specifies the terms and definitions of permanent magnet linear motor, classification, technical requirements and test methods, inspection rules, delivery preparation and
User service
This standard applies to permanent magnet linear motors (hereinafter referred to as "motor"), other linear motors can also refer to the use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 755 Rotating motor quotas and performance
GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Low temperature
GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. High temperature
GB/T 2423.3 Environmental testing for electric and electronic products Part 2. Test methods Test Cab. Constant hot and humid test
GB/T 2423.4 Environmental testing for electric and electronic products Part 2. Test methods Test Db. Alternating hot and humid test (12h
12h cycle)
GB/T 2423.5 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and Guidelines Impact
GB/T 2423.10 Environmental testing for electric and electronic products Part 2. Test methods Test Fc and guideline Vibration (sinusoidal)
GB/T 2423.15 Environmental testing for electric and electronic products Part 2. Test methods Test Ga and guidance. Steady acceleration
GB/T 2423.16 Environmental testing for electric and electronic products Part 2. Test methods Test Ja and guidelines.
GB/T 2423.17 Environmental testing for electric and electronic products Part 2. Test methods Test Ka. Salt spray
GB/T 2423.22 Environmental testing for electric and electronic products Part 2. Test methods Test N. Temperature changes
GB/T 2423.25 Environmental testing for electric and electronic products Part 2. Test methods Test Z/AM. Low temperature/low pressure synthesis test
GB/T 2423.26 Environmental testing for electric and electronic products Part 2. Test methods Test Z/BM. High temperature/low pressure synthesis test
GB/T 2828.1-2012 Sampling procedures for inspection - Part 1 - Batch-by-lot inspection by acceptance quality limit (AQL) plan
GB/T 2900.26 Electrotechnical terminology control motor
GB/T 6113.203 Radio disturbance and immunity measuring apparatus and methods of measurement Part 2-3 - Radio disturbance and immunity
Measurement methods Radiation disturbance measurement
GB/T 6113.204 Radio disturbance and immunity measuring apparatus and methods - Part 2-4. Radio disturbance and immunity
Measurement method Immunity measurement
Basic technical requirements for control of electric motors GB/T 7345-2008
GB/T 7346 control the basic shape and structure of the motor type
GB/T 10405 control motor model nomenclature
GB/T 10069.1 rotary motor noise measurement methods and limits - Part 1. Rotor electrical noise measurement method
GB 17799.3 Common Criteria for Electromagnetic Compatibility Launch Standards for Residential, Commercial and Light Industrial Environments […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34115-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34115-2017
$355.00