GB/T 34097-2017Test method for light stability of petroleum products (English PDF)
石油产品光安定性测定法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34097-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 31, 2017
Implementation date
February 1, 2018
Scope
GB/T 34097-2017 is the English-translated version of 石油产品光安定性测定法.
GB/T 34097-2017 is the Chinese standard "Test method for light stability of petroleum products". Its scope clause reads: This standard specifies the determination of light stability of petroleum products equipment, reagent materials, test procedures, data processing and precision and so on.
This standard applies to light colored refined petroleum products, including paraffin, white oil, liquid paraffin, rubber filled oil, insulating oil, lubricating base oil And jet fuel, etc., the light stability of the determination of the range of 30 Sebat color number ~ -16 Sebot color number.
This standard does not apply to gasoline, solvent oil, naphtha and other light petroleum products, as well as diesel, lubricants and other dark petroleum products. Its clauses include terms and definitions; principle; equipment.
Found what you need?
Document preview — GB/T 34097-2017
National Standard of the People's Republic of China
- ICS
- 75.140
- Classification
- E 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 principle
- 5 equipment
1 Scope
This standard specifies the determination of light stability of petroleum products equipment, reagent materials, test procedures, data processing and precision and so on.
This standard applies to light colored refined petroleum products, including paraffin, white oil, liquid paraffin, rubber filled oil, insulating oil, lubricating base oil
And jet fuel, etc., the light stability of the determination of the range of 30 Sebat color number ~ -16 Sebot color number.
This standard does not apply to gasoline, solvent oil, naphtha and other light petroleum products, as well as diesel, lubricants and other dark petroleum products.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Petroleum products - Determination of color - Automatic tristimulus value method
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Light stability
Under the conditions specified, petroleum products resist the ability of ultraviolet light to maintain their properties without permanent change,
Said.
3.2 Saybolt color color
An empirical measure indicating the color of a clear petroleum product as determined by GB/T 3555 or NB/SH/T 0905, the Sebot color number
The range is from -16 (deepest) to 30 (shallowest).
[NB/SH/T 0905-2015, Definition 3.5]
4 principle
The sample container filled with a sealed sample is placed in a thermostatic chamber of a photostabilizer and irradiated at a temperature and a UV intensity of
Set the time, and then use the automatic colorimeter to measure the color of the sample after illumination, with the Sebott color number indicates the light stability of the sample results.
5 equipment
5.1
light stability tester, including digital display with temperature illumination control unit, UV irradiation heating unit and the sample thermostat photo
Shot room. Instrument temperature control range 85.0 °C ~ 95.0 °C, temperature control accuracy of ± 1.0 °C, the display accuracy of 0.1 °C; the surface of the sample irradiated purple […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34097-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34097-2017
$155.00