GB/T 33978-2017Proton exchange membrane fuel cell modules for road vehicles (English PDF)
道路车辆用质子交换膜燃料电池模块
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33978-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 12, 2017
Implementation date
February 1, 2018
Scope
GB/T 33978-2017 is the English-translated version of 道路车辆用质子交换膜燃料电池模块.
GB/T 33978-2017 specifies the requirements, the test equipment, the test methods, the inspection rules and the marking, packaging, transport and storage of proton exchange membrane fuel cell modules for road vehicles, and applies to those modules.
The hydrogen leakage concentration must not exceed 25% of the lower flammable limit and the leakage rate must meet the requirement for fuel cell electric vehicle parts given in SAE J2578-2009; where the complete vehicle imposes requirements on the module, those must be met as well.
The test preparation covers the monitoring and control of module temperature, of the cooling liquid and of the reactant gas in and out of the module, and a vibration platform able to excite the module in the longitudinal, lateral and vertical directions.
The test methods are meant to be run in the order given, and the conducted emission voltage method test of the module controller follows 6.2 of GB/T 18655-2010.
Clauses 6.1 to 6.15 are the type tests and 6.1, 6.2, 6.3, 6.10 and 6.11 the routine tests.
It also fixes the damp-proof and vibration-proof packaging, the content of the outer marking of the boxes, the protection of the product in transit from mechanical shock, sunlight and rainwater, and the documents to be supplied, including the inspection of key and installation dimensions against the design drawings and the itemised list of everything in the box.
An informative annex gives the vibration test. It takes its terms from GB/T 28816 and cites GB/T 4208-2008. It was issued on 12 July 2017 and has applied since 1 February 2018.
Found what you need?
Document preview — GB/T 33978-2017
National Standard of the People's Republic of China
- ICS
- 27.070
- Classification
- K 82
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative References4
- 3 Terms and definitions5
- 4 Requirements5
- 5 Test preparation7
- 6 Test methods9
- 7 Inspection rules14
- 8 Marking, packaging, transportation and storage14
- 9 Documents16
- Annex A (Informative) Vibration test18
- Bibliography22
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This Standard specifies the requirements, test equipment, test methods, inspection rules and marking, packaging, transportation and storage, etc. for proton exchange membrane fuel cell modules for road vehicles.
This Standard applies to proton exchange membrane fuel cell modules for road vehicles (hereinafter referred to as modules).
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition dated applies to this document. For undated references, the latest edition of the referenced documents (including all amendments) applies to This Standard.
GB/T 4208-2008, Degrees of protection provided by enclosure (IP code)
3 Terms and definitions
For the purposes of this document, the following terms and definitions, and those defined in GB/T 28816, apply.
4 Requirements
Conduct test as specified in 6.3. The hydrogen leakage concentration of modules shall not exceed 25% LFL. The hydrogen leakage rate shall meet the requirements for the hydrogen leakage of fuel cell electric vehicle parts specified in SAE J2578-2009.
If a complete vehicle has requirements on modules, then the requirements of the complete vehicle shall be met.
5 Test preparation
Monitoring and control of module temperature - being capable of testing and controlling the temperature of circulation cooling liquid and the temperature of reactant gas in and out of modules, as needed.
Vibration test platform shall be capable of meeting the requirements for module vibration test and vibrating in the longitudinal direction, lateral direction, vertical direction, etc.
6 Test methods
It is recommended that the following sequence be followed to conduct test.
Conduct the conducted emission-voltage method test of module controller in accordance with the test method specified in 6.2 of GB/T 18655-2010.
7 Inspection rules
The above 6.1 ~ 6.15 are type tests. 6.1, 6.2, 6.3, 6.10 and 6.11 are routine tests.
8 Marking, packaging, transportation and storage
Packaging shall meet the requirements for damp-proofing and vibration-proofing.
The basic content of the outer marking of packaging boxes shall include.
During transportation, products shall be protected from drastic mechanical shock, sunlight exposure and rainwater.
9 Documents
In accordance with design drawings, conduct inspection for key dimensions and installation dimensions. And give inspection summaries for each item.
All articles inside product packaging box are listed one by one, such as materials and documents, to indicate quantities and names for the convenience of the receiver to verify. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 33978-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 4208-2008 — Degrees of protection provided by enclosure (IP code)
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 33978-2017
$125.00