GB/T 33909-2017Methods for chemical analysis of platinum - Determination of palladium, rhodium, iridium, ruthenium, gold, silver, aluminium, bismuth, chromium, copper, iron, nickel, lead, magnesium, manganese, tin, zinc, silicon content - Inductively coupled plasma mass spectrometry (English PDF)
纯铂化学分析方法 钯、铑、铱、钌、金、银、铝、铋、铬、铜、铁、镍、铅、镁、锰、锡、锌、硅量的测定 电感耦合等离子体质谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33909-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 12, 2017
Implementation date
May 1, 2018
Scope
GB/T 33909-2017 is the English-translated version of 纯铂化学分析方法 钯、铑、铱、钌、金、银、铝、铋、铬、铜、铁、镍、铅、镁、锰、锡、锌、硅量的测定 电感耦合等离子体质谱法.
GB/T 33909-2017 is the Chinese standard "Methods for chemical analysis of platinum - Determination of palladium, rhodium, iridium, ruthenium, gold, silver, aluminium, bismuth, chromium, copper, iron, nickel, lead, magnesium, manganese, tin, zinc, silicon content - Inductively coupled plasma mass spectrometry".
Its scope clause reads: This standard specifies the method for the determination of the amount of palladium, rhodium, iridium, ruthenium, ruthenium, silver, silver, aluminum, bismuth, chromium, copper, iron, nickel, lead, magnesium, manganese, tin, zinc and silicon.
This standard is applicable to the determination of palladium, rhodium, iridium, ruthenium, ruthenium, silver, aluminum, bismuth, chromium, copper, iron, nickel, lead, magnesium, manganese, tin, zinc and silicon in pure platinum.
Each element The range of determination is shown in Table 1.
Table 1 Determination of each element Element determination range /% element determination range /% Pd 0.000020 to 0.0040 Cu 0.000020 to 0.0040 Rh 0.000020 to 0.0040 Fe 0.000020 to 0.0040 Ir 0.000020 to 0.0040 Ni 0.000020 to 0.0040 Ru 0.000020 ~ 0.0040 Pb 0.000020 ~ 0.0040 Au 0.000050 to 0.0040 Mg 0.000050 to 0.0040 Ag 0.000020 to 0.0040 Mn 0.000020 to 0.0040 Al 0.000050 to 0.0040 Sn 0.000020 to 0.0040 Bi 0.000020 to 0.0040 Zn 0.000050 to 0.0040 Cr 0.000020 to 0.0040 Si 0.00050 to 0.0040. Its clauses include principle of the method; reagent.
Found what you need?
Document preview — GB/T 33909-2017
National Standard of the People's Republic of China
- ICS
- 77.120.99
- Classification
- Y 68
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 principle of the method
1 Scope
This standard specifies the method for the determination of the amount of palladium, rhodium, iridium, ruthenium, ruthenium, silver, silver, aluminum, bismuth, chromium, copper, iron, nickel, lead, magnesium, manganese, tin, zinc and silicon.
This standard is applicable to the determination of palladium, rhodium, iridium, ruthenium, ruthenium, silver, aluminum, bismuth, chromium, copper, iron, nickel, lead, magnesium, manganese, tin, zinc and silicon in pure platinum. Each element
The range of determination is shown in Table 1.
Table 1 Determination of each element
Element determination range /% element determination range /%
Pd 0.000020 to 0.0040 Cu 0.000020 to 0.0040
Rh 0.000020 to 0.0040 Fe 0.000020 to 0.0040
Ir 0.000020 to 0.0040 Ni 0.000020 to 0.0040
Ru 0.000020 ~ 0.0040 Pb 0.000020 ~ 0.0040
Au 0.000050 to 0.0040 Mg 0.000050 to 0.0040
Ag 0.000020 to 0.0040 Mn 0.000020 to 0.0040
Al 0.000050 to 0.0040 Sn 0.000020 to 0.0040
Bi 0.000020 to 0.0040 Zn 0.000050 to 0.0040
Cr 0.000020 to 0.0040 Si 0.00050 to 0.0040
2 principle of the method
The samples were dissolved in hydrochloric acid-nitric acid, and the signal intensity of isotope was measured in the reaction cell working mode.
Rhodium, ruthenium, silver, aluminum, bismuth, copper, nickel, lead, magnesium, manganese and zinc to yttrium as internal standard, and the signal intensity of isotope was measured under normal working mode.
The signal intensity of isotope was determined under the normal working mode with indium as the internal standard. The gold was treated with rhenium as the internal standard, and under the reaction cell model and equivalent deduction
Determine the signal strength of its isotopes.
3 reagent
Unless otherwise stated, only reagents identified as excellent grade and primary water with resistivity >=18.2Mohm · cm-1 are used; standard solution, reagent
The solution is stored in a plastic bottle.
3.1
potassium hydroxide, excellent grade pure.
3.2
nitric acid (rho = 1.42g/mL), MOS grade.
3.3
hydrochloric acid (rho = 1.19g/mL), MOS grade.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 33909-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 33909-2017
$145.00