GB/T 33600-2017Sandwich composite wallboard with porous concrete using metal tailings (English PDF)
金属尾矿多孔混凝土夹芯系统复合墙板
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33600-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 12, 2017
Implementation date
June 1, 2018
Scope
GB/T 33600-2017 is the English-translated version of 金属尾矿多孔混凝土夹芯系统复合墙板.
GB/T 33600-2017 covers the sandwich composite wallboard whose core is a porous concrete made with metal tailings. It specifies the terms and definitions, the classification and marking, the raw materials, the requirements, the test methods, the inspection rules, and the marking, transport and storage of these panels.
It defines the core material itself: a lightweight porous concrete made by a foaming process from a slurry of metal tailings powder, at a proportion of not less than 30 %, together with reinforcing fibre, cement, admixture and water.
It applies to the composite wall panels used in industrial and civil buildings as non-load-bearing internal walls and external walls, or for thermal and sound insulation.
It cites GB 6566, GB/T 9978.8, GB/T 13475 and GB/T 19889.3 among others. It was issued on 12 July 2017 and has applied since 1 June 2018.
Found what you need?
Document preview — GB/T 33600-2017
National Standard of the People's Republic of China
- ICS
- 91.110
- Classification
- Q 92
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative reference documents
- 3 Terms and definitions
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the terminology and definition, classification and marking of metal tailings, perforated concrete composite wall panels, raw materials, requirements, test Inspection methods, inspection rules, signs, transport and storage.
This standard applies to industrial and civil construction of non-load-bearing interior wall, external walls or building insulation, sound insulation with metal tailings porous concrete core system Composite wall panels (hereinafter referred to as "composite wall panels").
2 Normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.
GB 166 General Portland cement
GB/T 1839 Quality test method for galvanized layer of steel products
GB/T 2518 continuous hot - dip galvanized steel sheet and strip
GB/T 2828.1 Sampling inspection procedures Part 1: Batch inspection sampling plan for retrieval by quality limit (AQL)
GB 6566 Radiation nuclide limits for building materials
Concrete admixture
GB/T 9978.8 Test methods for fire resistance of building elements - Part 8: Particular requirements for non-load-bearing vertical separation members
GB/T 11969 Test method for performance of autoclaved aerated concrete
Steel keel for construction
GB/T 13475 Determination of heat preservation and heat transfer properties - Calibration and protection of hot box method
GB/T 14684 Construction of sand
GB/T 15856.2 Cross recessed countersunk head self drilling tapping screws
GB/T 19889.3 Acoustics - Measurement of sound insulation for building and building components - Part 3: Laboratory measurement of airborne sound insulation for building components
Synthetic fibers for cement concrete and mortar
JC/T 412.1 Fiber cement flat panel - Part 1: Asbestos - free fiber cement
JC/T 1055 fiber cement sandwich composite wall panels
JGJ63 Standard for concrete water use
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Metal tailings porous concrete
With the metal tailings powder (incorporation of not less than 30%), reinforced fiber, cement, admixture and water composition of the slurry, made by the foam process Of lightweight porous concrete.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1839Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
- GB/T 2518Continuously hot-dip zinc and zinc alloy coated steel sheet and strip
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB 6566Limits of radionuclides in building materials
- GB/T 9978.8Fire-resistance tests -- Elements of building construction -- Part 8: Specific requirements for non-loadbearing vertical separating elements
- GB/T 11969Test methods of autoclaved aerated concrete
GB 166 · JGJ63
Similar standards
How to Download GB/T 33600-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 16629-2008 — Solvent for vegetable oils extraction
GB 16636-2008 — Code of safety for diver's use of electricity underwater
GB 16655-2008 — Safety of machinery -- Integrated manufacturing systems -- Basic requirements
Secure payment via Stripe
Payments accepted
GB/T 33600-2017
$205.00