Valid

GB/T 33508-2017Recommended practice for riser fatigue (English PDF)

立管疲劳推荐作法

Preview PDF

This is a limited preview

Buy now to download the full PDF (47 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33508-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

February 28, 2017

Implementation date

September 1, 2017

Scope

GB/T 33508-2017 is the English-translated version of 立管疲劳推荐作法.

GB/T 33508-2017 is a recommended practice for the fatigue analysis of risers.

It applies to the fatigue limit state assessment of metal risers of every kind, although the standard design fatigue factors given in its 8.2 apply only to steel risers, and its assessment procedure suits risers designed to any recognised specification, such as DNV-OS-F201.

It covers fatigue design, the use of SN curves and their selection and evaluation, stress concentration factors, the fatigue damage caused by vortex-induced vibration and how that vibration is relieved, the combination of wave-frequency, low-frequency and VIV fatigue damage, the design fatigue factors and the safety factors drawn from risk and from structural reliability analysis, and the assessment of fatigue life in service, its extension and the residual life. Issued on 28 February 2017, it has applied since 1 September 2017.

Found what you need?

Document preview — GB/T 33508-2017

National Standard of the People's Republic of China

ICS
75.180.10
Classification
E 92

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 normative reference document
  • 3 terms, definitions, symbols, codes and abbreviations
  • 3.1 Terms and definitions
  • 3.2 Abbreviations
  • 3.3 Symbol
  • 3.4 Greek characters
  • 4 Fatigue design
  • 4.1 General
  • 4.2 Use the SN curve for fatigue assessment
  • 4.3 Fatigue Damage Assessment Procedure
  • 4.4 Whole Fatigue Analysis Procedure
  • 4.5 Fatigue stress
  • 4.6 Crack propagation calculation Fatigue assessment
  • 5 SN curve
  • 5.1 General
  • 5.2 Double slope SN curve: SY/T 10049
  • 5.3 Single slope SN curve
  • 5.4 Exceptions and deletions
  • 5.5 Stress concentration factor
  • 5.6 Selection of SN Curve
  • 5.7 SN curve evaluation
  • 6 Vortex vibration (VIV) caused by fatigue damage
  • 6.1 VIV analysis
  • 6.2 Acceptance Criteria
  • 6.3 Simplified fatigue damage assessment
  • 6.4 Methods for Relieving VIV
  • 7 combination of fatigue damage
  • 7.1 General
  • 7.2 Acceptance criteria
  • 7.3 Combination of WF and LF Fatigue Damage
  • 7.4 Combined with VIV Fatigue Damage
  • 8 Design Fatigue Coefficient
  • 8.1 General
  • 8.2 Design Fatigue Coefficient
  • 8.3 Safety factor based on enhanced risk
  • 8.4 Safety factor for structural reliability analysis based on specific working conditions
  • 8.5 VIV safety factor
  • 9 Fatigue Life Life Assessment
  • 9.1 In-service fatigue testing
  • 9.2 Fatigue life extension
  • 9.3 Residual fatigue life assessment
  • Appendix A (Normative Appendix) Fatigue Damage Assessment
  • Appendix B (Normative Appendix) Safety Principles and Safety Level
  • Reference

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies recommended practices for riser fatigue analysis.

This standard applies to all types of metal riser fatigue limit state assessment. However, the standard design fatigue coefficients given in 8.2 are only Applicable to steel risers. The evaluation procedure for this standard applies to risers designed in accordance with any recognized specification, such as DNV-OS-F201.

Note 1: The purpose of this standard is to describe the metal riser to withstand repeated load fluctuations in the fatigue assessment method, and DNV-OS-F201 recommended fatigue analysis method To supplement. See SY/T 10049. The purpose of fatigue design is to ensure that the riser has sufficient fatigue life. The calculated fatigue life is riser Establish the basis for effective testing procedures during manufacturing and operation.

NOTE 2 In order to ensure that the riser performs its intended function, it is advisable to carry out a fatigue assessment of each of the representative risers subjected to fatigue loads (if applicable Fine fatigue analysis support). It should be noted that any component or part of the riser, each welded joint and accessories or other forms of stress concentration is potential Of the fatigue crack source, should be considered separately.

2 Normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.

SY/T 10049-2004 Recommended practice for fatigue strength analysis of offshore steel structures

ISO 2394:1998 General Principles of Structural Reliability (Generalprinciplesonreliabilityforstructures)

BS 7910 Guidance on the Method for Evaluating Cracks in Metal Structures (Guideonmethodsforassessingtheacceptabilityof flawsinmetalicstructures

DNV-CN-30.6 Structural reliability analysis of marine structures (Structuralreliabilityanalysis ofmarinestruc-tures

DNV-OS-E301 mooring positioning (Positionmooring)

DNV-OS-F201 dynamic riser (Dynamicrisers)

DNV-RP-C205 Environmental conditions and environmental loads (Environmentalconditions and environmentalloads)

DNV-RP-F204:2010 riser fatigue recommended practice (RiserFatigue)

UK DOE-1984 UK Department of Energy Offshore Facilities Design and Construction Guide (Offshoreinstalations. Guidanceon designandconstruction

3 Terms, definitions, symbols, codes and abbreviations

3.1 Terms and definitions

The following terms and definitions apply to this document.

3.1.1 Corrosion margin

The pipe or component wall thickness allows for an increase in corrosion and/or erosion and/or wear.

3.1.2 Design fatigue coefficient

The safety factor is used to increase the probability of avoiding fatigue failure. Life should be applied DFF, the calculated fatigue life should be longer than the service life

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 47 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 2394-1998 · BS 7910 · DNV-CN-30.6 · DNV-OS-E301 · DNV-OS-F201 · DNV-RP-C205 · DNV-RP-F204-2010 · UK DOE-1984

Similar standards

How to Download GB/T 33508-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
47 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 33508-2017

$570.00