Valid

GB/T 33429-2016Silicone rubber compunds - High tear strength type and high tensile strength type (English PDF)

硅橡胶混炼胶 高撕裂强度型和高拉伸强度型

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33429-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 30, 2016

Implementation date

July 1, 2017

Scope

GB/T 33429-2016 is the English-translated version of 硅橡胶混炼胶 高撕裂强度型和高拉伸强度型.

GB/T 33429-2016 is the Chinese standard "Silicone rubber compunds - High tear strength type and high tensile strength type".

Its scope clause reads: This standard specifies the high tear strength, high tensile strength of silicone rubber compound classification and naming, requirements, inspection rules and packaging, standard Chi, transport and storage.

This standard is suitable for high tear strength (H >= 45kN/m, M >= 35kN/m), high tensile strength (H >= 10MPa, M type >=8MPa) of silicone rubber compound. Its clauses include normative reference documents; abbreviations.

Found what you need?

Document preview — GB/T 33429-2016

National Standard of the People's Republic of China

ICS
83.060
Classification
G 40

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions

1 Scope

This standard specifies the high tear strength, high tensile strength of silicone rubber compound classification and naming, requirements, inspection rules and packaging, standard

Chi, transport and storage.

This standard is suitable for high tear strength (H >= 45kN/m, M >= 35kN/m), high tensile strength (H >= 10MPa, M type

>=8MPa) of silicone rubber compound.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

Rubber, vulcanized or thermoplastic elastomers - Determination of tensile stress - strain properties GB/T GB/T 529-2008 Determination of tear strength of vulcanized rubber or thermoplastic rubber (pants, right angle and crescent specimens)

GB/T 531.1 vulcanized rubber or thermoplastic rubber press hardness test method Part 1. Shore hardness tester (Shore hardness)

GB/T 533 Determination of vulcanized rubber or thermoplastic rubber density

GB/T 1681 Determination of resilience of vulcanized rubber

GB/T 6038 rubber test compound dosing, kneading and vulcanizing equipment and operating procedures

Representation and Judgment of Revision Rule and Limit Value of GB/T 8170 Numbers

Classification and System Nomenclature of Silicone Rubber Composites GB/T 32365-2015

3 abbreviations

The following abbreviations apply to this document.

DMBHa. 2,5-dimethyl-2,5-di (tert-butylperoxy) hexane [2,5-dimethyl-2,5-di (tert-butylperoxy) hexane]

[GB/T 21871-2008, 3.20]

Note. vulcanizing agent; commonly known as double 2,5 (read as double five).

Classification and naming

According to the provisions of GB/T 32365-2015 classification and naming.

High tear strength type --- expressed in T, including the tear strength >= 45kN/m of the H type (expressed by TH) and tear strength >= 35kN/m

Of the M type (expressed in TM).

High tensile strength type --- to S, including the tensile strength >= 10MPa H-type (SH said) and tensile strength >= 8MPa

M type (expressed as SM).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 33429-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 33429-2016

$145.00