GB/T 33422-2016Thermoplastic elastomer - Determination of heavy metal contents - (English PDF)
热塑性弹性体 重金属含量的测定 电感耦合等离子体原子发射光谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33422-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2016
Implementation date
July 1, 2017
Scope
GB/T 33422-2016 is the English-translated version of 热塑性弹性体 重金属含量的测定 电感耦合等离子体原子发射光谱法.
GB/T 33422-2016 is the Chinese standard "Thermoplastic elastomer - Determination of heavy metal contents - ".
Its scope clause reads: This standard specifies the use of inductively coupled plasma atomic emission spectrometry for the determination of thermoplastic elastomers and their products lead, mercury, cadmium, chromium, Selenium, antimony, barium and arsenic content.
This standard is applicable to the determination of lead, mercury, cadmium, chromium, selenium, antimony, barium and arsenic in thermoplastic elastomers and their products, but is not suitable for determination The chromium added to the thermoplastic elastomer in the form of chromium trioxide.
Its clauses include normative reference documents; method summary; reagents and materials; instruments and equipment; sample preparation.
Found what you need?
Document preview — GB/T 33422-2016
National Standard of the People's Republic of China
- ICS
- 83.060
- Classification
- G 40
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 method summary
- 4 reagents and materials
- 5 instruments and equipment
- 6 Sample preparation
1 Scope
This standard specifies the use of inductively coupled plasma atomic emission spectrometry for the determination of thermoplastic elastomers and their products lead, mercury, cadmium, chromium,
Selenium, antimony, barium and arsenic content.
This standard is applicable to the determination of lead, mercury, cadmium, chromium, selenium, antimony, barium and arsenic in thermoplastic elastomers and their products, but is not suitable for determination
The chromium added to the thermoplastic elastomer in the form of chromium trioxide.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 6682 Analytical laboratory water specifications and test methods
Natural and synthetic raw rubber samples and their preparation methods GB/T 15340
3 method summary
The samples were treated with concentrated nitric acid and digested by microwave. The solution was digested with inductively coupled plasma atomic emission spectrometry (ICP-OES)
The emission intensity of the measured element was measured, and the content of each element was measured according to the standard curve.
4 reagents and materials
4.1 General
Unless otherwise specified, only analytical reagents are used. Preparation of water should be consistent with GB/T 6682 provisions of more than two pure water.
4.2
nitric acid (rho = 1.40 g/mL).
4.3
nitric acid (5 95).
4.4
standard solution of lead, mercury, cadmium, chromium, selenium, barium and arsenic (1000µg/mL), antimony standard solution (500µg/mL). commercial certified reference substance.
4.5 Mixed standard stock solution (10 µg/mL)
Remove the appropriate amount of each standard solution (4.4) in 100 mL of 5 mL of nitric acid (4.2)
The concentration of lead, mercury, cadmium, chromium, selenium, antimony, barium and arsenic is 10 µg/mL in the volume of the flask.
Solution.
5 instruments and equipment
5.1
high-pressure sealed microwave digestion instrument, equipped with temperature or pressure safety control device, the instrument operating conditions see Appendix A.
5.2
Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-OES), see Table B for the operating conditions of the instrument.
5.3
Analysis of the balance (sense of 0.1mg).
6 Sample preparation
Sampling and preparation of samples according to GB/T 15340, thermoplastic elastomer products should be representative of bulk cargo. According to the nature of the sample […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 33422-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 33422-2016
$145.00