GB/T 33382-2016Inner armoured rubber hoses and hose assemblies for conveying dredging soil (English PDF)
内铠装输泥橡胶软管及软管组合件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33382-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2016
Implementation date
July 1, 2017
Scope
GB/T 33382-2016 is the English-translated version of 内铠装输泥橡胶软管及软管组合件.
GB/T 33382-2016 is the Chinese standard "Inner armoured rubber hoses and hose assemblies for conveying dredging soil". Its scope clause reads: This standard specifies the structure, size, requirements, test methods and inspection rules of rubber hose and hose assembly for inner armored mud.
This standard is suitable for the transmission of sea water with relative density between 1.0g/cm3 and 2.3g/cm3 at ambient temperature of -20 °C ~ 60 °C, Fresh water and mud, clay, sand mixture, especially for conveying coral reefs, gravel rubber hose. Its clauses include normative reference documents; terms and definitions.
Found what you need?
Document preview — GB/T 33382-2016
National Standard of the People's Republic of China
- ICS
- 83.140.40
- Classification
- G 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 terms and definitions
- 3.1 Rubber flange
1 Scope
This standard specifies the structure, size, requirements, test methods and inspection rules of rubber hose and hose assembly for inner armored mud.
This standard is suitable for the transmission of sea water with relative density between 1.0g/cm3 and 2.3g/cm3 at ambient temperature of -20 °C ~ 60 °C,
Fresh water and mud, clay, sand mixture, especially for conveying coral reefs, gravel rubber hose.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 229 Metallic materials Chibi pendulum impact test method
Metallic materials - Brinell hardness test - Part 1. Test methods
Rubber, vulcanized or thermoplastic elastomers - Determination of tensile stress - strain properties GB/T GB/T 529-2008 Determination of tear strength of vulcanized rubber or thermoplastic rubber (pants, right angle and crescent specimens)
GB/T 3512 vulcanized rubber or thermoplastic rubber hot air accelerated aging and heat resistance test
Rubber and plastics hoses and hose assemblies - Hydrostatic test method GB/T GB/T 5567 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
GB/T 6342 Determination of linear dimensions of foam and rubber
GB/T 6343 Determination of apparent density of foam and rubber
Determination of compressive permanent deformation of flexible foamed polymeric materials GB/T 6669-2008
Rubber and plastics hoses and hose assemblies - Terminology GB/T GB/T 7762 vulcanized rubber or thermoplastic rubber resistant to ozone cracking static tensile test
GB/T 9124 steel pipe flange technical conditions
GB/T 9573 Rubber and plastics hoses and hose assemblies - Hose dimensions and hose length measurement method
GB/T 9576 Guide for selection, storage, use and maintenance of rubber and plastic hoses and hose assemblies
GB/T 9577 Rubber and plastics hoses and hose assemblies - Marking, packing and transporting rules
GB/T 9867 Determination of abrasion resistance of vulcanized rubber or thermoplastic rubber (rotary roller type grinding method)
GB/T 10541-2013 Offshore parking oil suction rubber hose
GB/T 11211 Determination of bond strength of vulcanized rubber or thermoplastic rubber and metal - Two - plate method GB/T GB/T 14905 Determination of bond strength between rubber and plastic hoses
GB/T 33380 Large rubber hose assemblies - Tensile test
Code for construction of welding equipment for field equipment and industrial piping GB 50236
3 terms and definitions
The definitions and definitions of the following terms and definitions apply to this document.
3.1 Rubber flange
The both ends of the hose made of the inner liner, the reinforcing layer and the overcoat material are erected to the opposite direction to the axial direction of the tube, […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 33382-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 33382-2016
$205.00