Valid

GB/T 33364-2016Offshore mooring steel wire ropes (English PDF)

海洋工程系泊用钢丝绳

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33364-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 30, 2016

Implementation date

September 1, 2017

Scope

GB/T 33364-2016 is the English-translated version of 海洋工程系泊用钢丝绳.

GB/T 33364-2016 is the Chinese standard "Offshore mooring steel wire ropes".

Its scope clause reads: This standard specifies the nominal diameter of 52mm ~ 160mm marine engineering mooring wire rope (hereinafter referred to as wire rope) terms and Definition, classification and marking, ordering contents, materials, technical requirements, inspection, testing, reference weight, acceptance method, packaging, marking and quality certification Books, safe use and maintenance.

This standard is applicable to the design, manufacture and acceptance of marine engineering mooring and long mooring wire ropes. Its clauses include normative reference documents; terms and definitions; classification and marking.

Found what you need?

Document preview — GB/T 33364-2016

National Standard of the People's Republic of China

ICS
77.140.65
Classification
H 49

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 normative reference documents
  • 3 terms and definitions
  • 4 Classification and marking

1 Scope

This standard specifies the nominal diameter of 52mm ~ 160mm marine engineering mooring wire rope (hereinafter referred to as wire rope) terms and

Definition, classification and marking, ordering contents, materials, technical requirements, inspection, testing, reference weight, acceptance method, packaging, marking and quality certification

Books, safe use and maintenance.

This standard is applicable to the design, manufacture and acceptance of marine engineering mooring and long mooring wire ropes.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

Metallic materials - Tensile testing - Part 1. Test methods for room temperature GB/T Metallic materials - Wire - Part 1. Test method for unidirectional torsion GB/T Quality test method for galvanized layer of steel products GB/T 1839

GB/T 2104 Wire rope packaging, marking and quality of the general requirements of the certificate

Representation and Judgment of Numerical Correction Rule and Limit Value of GB/T 8170

Method for determination of actual breaking tension of steel wire rope GB/T 8358

GB/T 8706 Steel wire rope terms, marking and classification

GB/T 21965 Wire rope acceptance and defect terms

Method for determination of actual elastic modulus of steel wire rope GB/T 24191

GB/T 29086 wire rope safe use and maintenance

NB/SH/T 0387 Grease for Wire Rope

YB/T 5343 round wire with rope

3 terms and definitions

GB/T 8706 Definitions and the following terms and definitions apply to this document.

3.1 Mobile mooring

Mooring at a specific location with a mooring time of no more than 5 years.

3.2 Long mooring

Mooring in the same position mooring time greater than 5 years.

4 Classification and marking

4.1 Classification

The steel wire rope is divided into multi-strand wire rope, single wire rope and sealed steel wire rope. Typical categories are shown in Table 1 to Table 3, respectively.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download GB/T 33364-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 33364-2016

$355.00