Valid

GB/T 33361-2016Desulphurization injection lance of hot metal (English PDF)

铁水脱硫喷枪

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33361-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 30, 2016

Implementation date

September 1, 2017

Scope

GB/T 33361-2016 is the English-translated version of 铁水脱硫喷枪.

GB/T 33361-2016 is the Chinese standard "Desulphurization injection lance of hot metal". Its scope clause reads: This standard specifies the terms and definitions of hot metal desulphurization spray guns, grades, technical requirements, test methods, inspection rules, packaging, marking, transportation, Storage and quality certificate.

This standard applies to the hot metal pretreatment desulfurization spray gun (hereinafter referred to as gun), hot metal dephosphorization, desilicon pretreatment and other spray gun can refer to this standard.

Its clauses include normative reference documents; terms and definitions; grades; technical requirements.

Found what you need?

Document preview — GB/T 33361-2016

National Standard of the People's Republic of China

ICS
73.080
Classification
D 52

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 normative reference documents
  • 3 terms and definitions
  • 4 grades
  • 5 technical requirements

1 Scope

This standard specifies the terms and definitions of hot metal desulphurization spray guns, grades, technical requirements, test methods, inspection rules, packaging, marking, transportation,

Storage and quality certificate.

This standard applies to the hot metal pretreatment desulfurization spray gun (hereinafter referred to as gun), hot metal dephosphorization, desilicon pretreatment and other spray gun can refer to this standard.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

Test method for flexural strength of refractory at room temperature GB/T 3001

Test method for compressive strength of refractory materials at room temperature GB/T GB/T 5988 Test method for variation of refractory heating permanent lines

GB/T 6900 Chemical analysis method for aluminum - silicon refractories

Test method for refractoriness of refractory materials GB/T 7322

GB/T 10326 - Determination of dimensions, appearance and cross - section of refractory products

GB/T 21114 Refractory X - ray fluorescence spectroscopy Chemical analysis Cast - in - place glass method

Standard Test Method for Viscosity and Bulk Density of YB/T 5200 Dense Refractory Castables

Standard Specification for Preparation of Unshaped Refractory Specimens - Part 1. Refractory Castables

3 terms and definitions

The following terms and definitions apply to this document.

3.1

By the inner steel pipe components and the outer layer of refractory materials consisting of functional refractory products for the injection of molten iron desulfurization pretreatment.

4 grades

4.1

molten iron desulfurization spray gun according to the outer layer of refractory alumina in the mass fraction is divided into PQL-65, PQL-55, PQL-50 three grades.

4.2

grades in the P, Q, L for the "spray" "gun" and "aluminum" the first letter of the Chinese phonetic alphabet, the number of alumina mass fraction. Examples are as follows.

PQL-65

Alumina mass fraction

PQ stands for gun, L stands for aluminum

5 technical requirements

5.1

The steel structure of the gun should meet the design requirements.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 33361-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 33361-2016

$85.00