GB/T 33107-2016Dimethyl carbonate for industrial use (English PDF)
工业用碳酸二甲酯
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33107-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 13, 2016
Implementation date
May 1, 2017
Scope
GB/T 33107-2016 is the English-translated version of 工业用碳酸二甲酯.
GB/T 33107-2016 is the Chinese standard "Dimethyl carbonate for industrial use". Its scope clause reads: This standard specifies the requirements, test methods, inspection rules as well as marking, packaging, transportation, storage and safety of dimethyl carbonate for industrial use.
This standard is applicable to dimethyl carbonate for industrial use produced from propylene carbonate or vinyl carbonate and methanol as raw material. Molecular formula: C3H6O3. Its clauses include requirements; test methods.
Found what you need?
Document preview — GB/T 33107-2016
National Standard of the People's Republic of China
- ICS
- 71.080.70
- Classification
- G 17
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Requirements
- 4 Test methods
- 5 Inspection rules
- 6 Marking, packaging, transportation and storage
- 7 Safety
1 Scope
This standard specifies the requirements, test methods, inspection rules as well as marking, packaging, transportation, storage and safety of dimethyl carbonate for industrial use.
This standard is applicable to dimethyl carbonate for industrial use produced from propylene carbonate or vinyl carbonate and methanol as raw material.
Molecular formula: C3H6O3
Structural formula:
Relative molecular mass: 90.10 (according to international relative atomic mass in 2011)
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 190 Packing symbol of dangerous goods
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 601 Chemical reagent - Preparations of reference titration solutions
GB/T 603 Chemical reagent - Preparations of reagent solutions for use in test methods
GB/T 4472-2011 Determination of density and relative density for chemical products
GB/T 6283 Chemical products - Determination of water - Karl·Fischer method (general method)
GB/T 6324.8 Test methods of organic chemical products - Part 8: Determination of water of liquid products - Carl·fischer coulometric method
GB/T 6678 General principles for sampling chemical products
GB/T 6680 General rules for sampling liquid chemical products
GB/T 6682 Water for analytical laboratory use - Specification and test methods
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 9722 Chemical reagent - General rules for the gas chromatography
GB/T 23942 Chemical reagents - General rules for inductively coupled plasma atomic emission spectrometry
GB 30000.7 Rules for classification and labelling of chemicals - Part 7: Flammable liquids
JY/T 023-1996 General rules for graphite furnace atomic absorption spectrophotometry
3 Requirements
3.1 Appearance
Colorless and transparent liquid without visible impurities.
3.2 Technical indexes
Dimethyl carbonate for industrial use shall meet the technical indexes shown in Table 1.
Table 1 Technical indexes
Item Index
Electronic grade Superior Grade I
Dimethyl carbonate for industrial use, omega/% >= 99.99 99.9 99.5
Methanol, omega/% <= 0.002 0.020 0.050
Water, omega/% <= 0.003 0.020 0.10
Density(rho20)/(g/cm3) 1.071 ± 0.005
Sodium/(µg/mL) <= 1.0 - -
Potassium/(µg/mL) <= 1.0 - -
Copper/(µg/mL) <= 1.0 - -
Iron/(µg/mL) <= 1.0 - -
Lead/(µg/mL) <= 1.0 - -
Zinc/(µg/mL) <= 1.0 - -
Chromium/(µg/mL) <= 1.0 - -
Nickel/(µg/mL) <= 1.0 - -
4 Test methods
4.1 Warning
Attention is drawn to the necessity for taking precautions to safeguard the health and safety of the personnel conducting the tests against the potential hazard may arise from the test specified in this standard.
Some reagents used in the analysis are toxic. Wear protective articles such as glasses and gloves during operation.
4.2 General requirement
Unless otherwise stated, only recognized analytically pure reagents and Grade III water specified in GB/T 6682 are used for the analysis.
Unless otherwise specified, the standard titration solutions, preparations and products used in the analysis shall be prepared in accordance with the requirements of GB/T 601 and GB/T 603.
4.3 Determination of dimethyl carbonate and methanol content
4.3.1 Method summary
Gas chromatography, under the selected chromatographic conditions, the specimen is gasified and passed through the chromatographic column to separate the components. Detect it with hydrogen flame detector. The content of dimethyl carbonate is calculated by area normalization method, and the content of methanol is calculated by external standard method.
4.3.2 Reagents
4.3.2.1 Hydrogen
the volume fraction is greater than 99.99%.
4.3.2.2 Nitrogen
the volume fraction is greater than 99.99%.
4.3.2.3 Air
dried and purified by silica gel or molecular sieve.
4.3.2.4 Methanol
chromatographically pure.
4.3.2.5 Dimethyl carbonate
electronic grade, the mass fraction of methanol is not greater than 0.001%.
4.3.3 Apparatus
4.3.3.1 Gas chromatograph
equipped with hydrogen flame ionization detector (FID) for capillary column analysis. The sensitivity of the whole machine shall meet the requirements of GB/T 9722, and the linear range meets the analysis requirements.
4.3.3.2 Recorder
chromatographic working station or processor.
4.3.3.3 Sample injector
10 µL microliter syringe.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 33107-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 33107-2016
$145.00