GB/T 32854.2-2017Automation systems and integration—Integration of advanced process control and optimization software for manufacturing systems—Part 2: Framework and functions (English PDF)
自动化系统与集成 制造系统先进控制与优化软件集成 第2部分：架构和功能
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32854.2-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
December 29, 2017
Scope
GB/T 32854.2-2017 is the English-translated version of 自动化系统与集成 制造系统先进控制与优化软件集成 第2部分：架构和功能.
GB/T 32854.2-2017 is Part 2 of GB/T 32854 and describes the architecture of an advanced process control and optimisation system for a manufacturing plant, both the relations between its own modules and its relations with the systems around it.
It then defines, module by module, the structure and the functions required of the soft-sensing module, the optimisation module, the advanced control module, the performance evaluation module and the platform the whole runs on.
Clause 2 defines the terms used, among them aided design, external framework, internal framework, key performance indicator, laboratory calibration and prior knowledge, and Appendix A works through the application of advanced process control to a circulating fluidised bed boiler.
It applies to the integration of such software in an enterprise manufacturing system. It was issued on 29 December 2017 and has applied since 29 December 2017.
Found what you need?
Document preview — GB/T 32854.2-2017
National Standard of the People's Republic of China
- ICS
- 25.040.40
- Classification
- J 07
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Terms and definitions
- 3 Abbreviations
- 4 APC-O system architecture
- 4.1 Overview
- 4.2 Internal Structure
- 4.3 External Architecture
- 5 APC-O module architecture and function
- 5.1 soft measurement module architecture and function
- 5.2 optimize the module's structure and function
- 5.3 Advanced Control Module Architecture and Function
- 5.4 Performance Evaluation Module Architecture and Function
- 5.5 Advanced Control and Optimization Platform and Function
- Appendix A (Informative) Circulating Fluidized Bed Boiler Advanced Process Control Application Case
- References
Foreword
GB/T 32854 "automation system and integrated manufacturing system advanced control and optimization software integration" is divided into four parts.
--- Part 1. Overview, concepts and terminology;
--- Part 2. Architecture and function;
--- Part 3. Activities model and workflow;
--- Part 4. Information exchange and use.
This section GB/T 32854 Part 2.
This section drafted in accordance with GB/T 1.1-2009 given rules.
1 Scope
GB/T 32854 provisions of this part of the advanced control and optimization system architecture and system architecture and external and internal relations, and detailed Finely defined system software measurement module, optimization module, advanced control module, performance evaluation module and the operation of the platform architecture, composition and function Claim.
This section applies to the enterprise manufacturing system advanced control and optimization of the software integration issues.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 Aided design
Use known data, experience, or rules to assist users in designing.
2.2 External framework
The architecture of the system and its external components.
2.3 Internal architecture
The relationship between the various modules within the system architecture.
2.4 Key performance indicator
A measure of the performance of some of the key components of a system or component.
Note 1. KPIs are selected based on specific tasks, operational planning and process improvement criteria.
Note 2. KPIs referred to in this section are located in the second layer and the third layer as defined in GB/T 20720.1 and GB/T 20720.3.
Note 3. Rewrite ISO 22400-1:2014, Definition 2.1.5.
2.5 Laboratory calibration
The use of laboratory testing data to adjust the output of soft-sensing results to achieve the system deviation of the offset correction.
2.6 A priori knowledge
No experience or prior knowledge gained. Example: Mechanism model and so on.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 32854.2-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 32854.1-2016 — Industrial automation systems and integration—Integration of advanced process control and optimization software for manufacturing systems—Part 1: overview, concepts and termnologies
GB/T 32854.3-2020 — Automation systems and integration—Integration of advanced process control and optimization software for manufacturing systems—Part 3: Activity models and workflows
GB/T 32854.4-2020 — Automation systems and integration—Integration of advanced process control and optimization software for manufacturing systems—Part 4: Information exchange and usage
Secure payment via Stripe
Payments accepted
GB/T 32854.2-2017
$235.00