Valid

GB/T 32829-2016Equipment maintenance and repair process of radio frequency identification technology specification (English PDF)

装备检维修过程射频识别技术应用规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32829-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 29, 2016

Implementation date

March 1, 2017

Scope

GB/T 32829-2016 is the English-translated version of 装备检维修过程射频识别技术应用规范.

GB/T 32829-2016 is the Chinese standard "Equipment maintenance and repair process of radio frequency identification technology specification".

Its scope clause reads: This standard specifies the large-scale railway trucks, mining and open-pit mining equipment, large-scale environmental protection equipment, large-scale complete sets of equipment, agricultural machinery and other large Complete sets of equipment and key metal parts of the inspection process of basic management requirements, as well as large-capacity tag data read under the inspection resume General technical requirements for sub - tags and readers.

This standard applies to the above sets of equipment and key metal parts inspection and maintenance process of radio frequency identification system application of the general management requirements, Design and Application of Electronic Tag and Reading and Writing Equipment. Its clauses include normative reference documents; terms and definitions.

Found what you need?

Document preview — GB/T 32829-2016

National Standard of the People's Republic of China

ICS
35.240.50
Classification
J 07

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 normative reference document
  • 3 Terms and definitions
  • 4 inspection maintenance history electronic label management requirements
  • 4.1 Check the maintenance history electronic label initialization
  • 4.2 Inspection and maintenance history Electronic label installation
  • 4.3 information record link
  • 4.4 inspection repair history electronic label removal
  • 4.5 information record content
  • 4.6 Information recording mode
  • 4.7 Inspection and maintenance history Electronic tag storage allocation
  • 5 inspection maintenance history electronic tag application requirements
  • 5.1 Operating frequency
  • 5.2 Inspection and maintenance history Electronic tag performance
  • 5.3 Inspection and maintenance history Electronic label packaging fixed and installation requirements
  • 6 reader application requirements
  • 6.1 reader application link
  • 6.2 reader environment adaptability requirements
  • 6.3 RFID fixed reader
  • 6.4 RFID Handheld Reader
  • 6.5 wireless transmission capacity
  • 6.6 Offline work ability

1 Scope

This standard specifies the large-scale railway trucks, mining and open-pit mining equipment, large-scale environmental protection equipment, large-scale complete sets of equipment, agricultural machinery and other large

Complete sets of equipment and key metal parts of the inspection process of basic management requirements, as well as large-capacity tag data read under the inspection resume

General technical requirements for sub - tags and readers.

This standard applies to the above sets of equipment and key metal parts inspection and maintenance process of radio frequency identification system application of the general management requirements,

Design and Application of Electronic Tag and Reading and Writing Equipment.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 32830.1-2016 Equipment manufacturing manufacturing process Radio frequency identification Part 1. Electronic tag technical requirements and applications specification

GB/T 32830.2-2016 Equipment manufacturing manufacturing process Radio frequency identification Part 2. Interrogator technical requirements and application specifications

3 terms and definitions

GB/T 32830.1, GB/T 32830.2 Definitions and the following terms and definitions apply to this document.

3.1 Inspection maintenance process

Equipment in the use of the process of inspection, maintenance, repair, scrapping and other processes.

Note. Inspection repair repair settings can be divided into planned maintenance and temporary maintenance, including planned maintenance, including overhaul, repair and minor repair, so as to restore the repair department

Points of precision and performance.

3.2 Overhaul

Disassembly, inspection, repair and replacement of all or most of the parts on a regular basis within the prescribed time limit.

Note. Overhaul should be checked before the inspection records, that is, damage and maintenance status.

3.3 Repair in repair

According to the actual situation of the equipment, the deterioration of the state has been difficult to achieve the requirements of the production process parts for targeted maintenance.

Note. In the repair, the general part of the demolition, inspection, replacement or repair failure of the parts, if necessary, the parts of the local maintenance and adjustment accuracy.

3.4 Minor minorrepair

According to the law of wear and tear, on the part of the serious wear and tear parts of the demolition and inspection.

3.5 Temporary repair

Check and repair the equipment for temporary faults.

Note. Temporary repair and non-critical components of key components.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 32829-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32829-2016

$105.00