GB/T 32810-2016Remanufacturing—Technological specifications of disassembly for (English PDF)
再制造 机械产品拆解技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32810-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 29, 2016
Implementation date
March 1, 2017
Scope
GB/T 32810-2016 is the English-translated version of 再制造 机械产品拆解技术规范.
GB/T 32810-2016 is the Chinese standard "Remanufacturing—Technological specifications of disassembly for". Its scope clause reads: This standard specifies the general requirements for the dismantling of remanufacturing machinery products, safety and environmental requirements, commonly used remanufacturing methods and codes Type connector.
This standard applies to the dismantling of mechanical products. Its clauses include normative reference documents; terms and definitions; disassembly classification; general requirements.
Found what you need?
Document preview — GB/T 32810-2016
National Standard of the People's Republic of China
- ICS
- 25.010
- Classification
- J 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 terms and definitions
- 4 disassembly classification
- 5 General requirements
1 Scope
This standard specifies the general requirements for the dismantling of remanufacturing machinery products, safety and environmental requirements, commonly used remanufacturing methods and codes
Type connector.
This standard applies to the dismantling of mechanical products.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Standard for Environmental Noise Discharge of Industrial Enterprises
Standard for Hazardous Waste Storage Pollution Control
Standard for Pollution Control of Storage and Disposal Site for General Industrial Solid Waste
GB/T 28619 Termination Terminology
3 terms and definitions
GB/T 28619 The terms and definitions defined apply to this document.
4 disassembly classification
According to the degree of disassembly damage is divided into destructive dismantling, part of the destructive dismantling and lossless dismantling.
5 General requirements
5.1 requirements before dismantling
5.1.1
Register the dismantling object and identify the information label in the eye-catching location.
5.1.2
will dismantle the object reasonable storage, to avoid improper storage caused by product corrosion, deformation and other damage.
5.1.3
The necessary cleaning and preliminary inspection shall be carried out to check the sealing and damage of the product.
5.1.4
The relevant drawings should be consulted to understand the structure and assembly relationship of the dismantling object, according to the parts connection form and size design or
Choose the appropriate dismantling methods and tools.
5.1.5
Measure the assembly gap between the parts to be dismounted and its relative position with the relevant parts and mark and record them.
5.1.6
Skills should be carried out for disassembled personnel.
5.1.7
Special procedures should be developed for the dismantling of dangerous operations.
5.2 Disassembly process requirements
5.2.1
Components that ensure the performance of remanufactured products are not fully dismantled and shall be tested or diagnosed as necessary to ensure that there is no concealment defect.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 32810-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 32810-2016
$165.00