GB/T 32606-2016Determination method of free formaldehyde in stationery goods - Spectrophotometry with acetylacetone (English PDF)
文具用品中游离甲醛的测定方法 乙酰丙酮分光光度法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32606-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 25, 2016
Implementation date
November 1, 2016
Scope
GB/T 32606-2016 is the English-translated version of 文具用品中游离甲醛的测定方法 乙酰丙酮分光光度法.
GB/T 32606-2016 is the Chinese standard "Determination method of free formaldehyde in stationery goods - Spectrophotometry with acetylacetone".
Its scope clause reads: This standard specifies the use of spectrophotometric determination of stationery (including adhesives, bags of fabrics and accessories, such as color mud, etc.) in the free Method for hydrolyzing formaldehyde content.
This standard applies to the formaldehyde content of more than 50mg/kg stationery test. Its clauses include normative reference documents; principle; reagent.
Found what you need?
Document preview — GB/T 32606-2016
National Standard of the People's Republic of China
- ICS
- 71.040.99
- Classification
- Y 50
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 principle
- 4 reagent
1 Scope
This standard specifies the use of spectrophotometric determination of stationery (including adhesives, bags of fabrics and accessories, such as color mud, etc.) in the free
Method for hydrolyzing formaldehyde content.
This standard applies to the formaldehyde content of more than 50mg/kg stationery test.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Preparation of standard titration solution for GB/T 601 chemical reagents
GB/T 6682 Analytical laboratory water specifications and test methods
3 principle
In the pH = 6 acetic acid - ammonium acetate buffer solution, formaldehyde and acetylacetone in the boiling water bath conditions to quickly generate a stable yellow
And the absorbance was measured at 415 nm after cooling. According to the standard curve, the free hydrolyzed formaldehyde content in the sample was calculated.
4 reagent
4.1
Unless otherwise stated, the reagents used are of analytical grade. Test water should meet the GB/T 6682 in the provisions of the three water.
4.2
acetylacetone solution (0.25%, volume fraction). Weigh 25g ammonium acetate, add a small amount of water to dissolve, add 3mL glacial acetic acid and 0.25mL
Acetylacetone, mix and then add water to 100mL, adjust the pH to 6.0. This solution is stored at 2 °C ~ 5 °C, can be stable for 1 month.
4.3 hydrochloric acid solution
1 5 (volume ratio).
4.4 Sodium hydroxide solution
30 g/100 mL.
4.5
iodine standard solution (0.1mol/L). according to GB/T 601 for preparation.
4.6
Sodium thiosulfate solution (0.1mol/L). Prepared according to GB/T 601.
4.7 starch solution (1g/100mL)
said 1g starch, with a small amount of water into a paste into 100mL boiling water, was a transparent solution, temporary use
Preparation.
4.8 Formaldehyde
mass fraction of 36% to 38%.
4.8.1 formaldehyde standard stock solution
take 10mL formaldehyde solution (4.8) placed in 500mL brown volumetric flask, diluted with water to the mark, mix.
Formaldehyde standard stock solution at 4 °C under the conditions of preservation, preservation period of 6 weeks.
4.8.2 formaldehyde standard stock solution calibration
draw 5.0mL formaldehyde standard stock solution (4.8.1) placed in 250mL iodine bottle, iodized standard
Solution (4.5) 30.0 mL, immediately add dropwise sodium hydroxide (4.4) until the color faded to light yellow (about 0.7 mL), allowed to stand for 10 min,
15 mL of hydrochloric acid solution (4.3) was added, left in the dark for 10 min, 100 mL of freshly boiled water was added, and the purified thiosulfide
Sodium hydroxide solution (4.6) titrated to light yellow, add the newly prepared starch solution (4.7) 1mL, continue to titrate until the blue has just disappeared to the end, the same
When the blank test. According to formula (1) calculation of formaldehyde standard stock solution concentration rho formaldehyde.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32606-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32606-2016
$85.00