GB/T 32599-2016Test method for removal force of attached components on textile products (English PDF)
纺织制品附件脱落强力试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32599-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 25, 2016
Implementation date
June 1, 2016
Scope
GB/T 32599-2016 is the English-translated version of 纺织制品附件脱落强力试验方法.
GB/T 32599-2016 is the Chinese standard "Test method for removal force of attached components on textile products". Its scope clause reads: This standard specifies the test method for the detachment of attachments on textile products.
This standard applies to textile products on the metal, textile, plastic and other materials of the annex. Its clauses include normative reference documents; terms and definitions; principle; instruments.
Found what you need?
Document preview — GB/T 32599-2016
National Standard of the People's Republic of China
- ICS
- 59.080.01
- Classification
- W 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 terms and definitions
- 4 principle
- 5 instruments
1 Scope
This standard specifies the test method for the detachment of attachments on textile products.
This standard applies to textile products on the metal, textile, plastic and other materials of the annex.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 6529 Standard atmosphere for textiles for humidity control and testing
3 terms and definitions
The following terms and definitions apply to this document.
3.1 Attachment
A component of a textile product that is connected, decorated, identified, or otherwise. For example, buttons, zipper head, bow, pompon and decorative pieces.
4 principle
The main body and the accessory of the article are held in the holder of the tester and stretched at a specified stretching rate until the attachment is dislodged or damaged from the main body
Bad, measure the maximum force; or stretch to the specified load for a certain period of time to assess whether the attachment from the main body off or damaged.
5 instruments
5.1 Tensile Tester
5.1.1
Determination of the maximum force using constant velocity elongation (CRE) tensile tester. Shall be instructed or recorded on the specimen to cause the attachment to fall off or
Damage to the maximum force of the device, the force value accuracy of ± 1%. The clamping distance can be set to 20mm or other distance, the drawing speed can be set to
100mm/min, the accuracy of ± 10%.
5.1.2
During the load test, the tensile tester shall be capable of carrying out a fixed load tensile test with a precision of ± 1%.
5.2 Clamp
Various types of grippers that can hold the product and the different accessories securely. One of the grippers holds the product and is gripped to hold the product
Not to make the product slippery, do not cut or damage the product; another gripper clamping accessories, clamping should avoid the obvious deformation or broken pieces
And so on. Figure 1 shows an example of several different types of grippers.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 32599-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 32599-2016
$85.00