GB/T 32574-2016Guide of maintenance for pumped-storage power station (English PDF)
抽水蓄能电站检修导则
This is a limited preview
Buy now to download the full PDF (61 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32574-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 25, 2016
Implementation date
November 1, 2016
Scope
GB/T 32574-2016 is the English-translated version of 抽水蓄能电站检修导则.
GB/T 32574-2016 is the Chinese standard "Guide of maintenance for pumped-storage power station". Its scope clause reads: This standard specifies the principle, project and quality requirements of the main equipment maintenance of the pumped storage power station.
This standard applies to the installed capacity of 250MW and above the pumped storage power station, 250MW below the pumped storage power plant reference to the Standard implementation. Its clauses include normative reference documents.
Found what you need?
Document preview — GB/T 32574-2016
National Standard of the People's Republic of China
- ICS
- 27.100
- Classification
- F 23
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 General
- 5 units and ancillary equipment
- 5.1 General provisions
- 5.2 Pump Turbine and ancillary equipment
- 5.3 Generating motor and auxiliary equipment
- 5.4 Unit maintenance after the test
- 6.1 General provisions
- 6.2 main transformer
- 6.3 high voltage cable
- 6.4 Gas Insulated Metal Closed Switchgear (GIS)
- 6.5 Gas insulated metal closed transmission line (GIL)
- 6.6 Generator outlet voltage equipment
- 7 power supply system
- 7.1 General provisions
- 7.2 Maintenance items and quality requirements
- 8 Static drive (SFC)
- 8.1 General provisions
- 8.2 Maintenance items and quality requirements
- 9.1 General provisions
- 9.2 Inspection items and quality requirements
- 10 relay protection and safety automatic device
- 10.1 General provisions
- 10.2 Maintenance items and quality requirements
- 11 Auxiliary auxiliary equipment
- 11.1 General provisions
- 11.3 Water supply and drainage system
- 12 DC equipment
- 12.1 General provisions
- 12.2 Maintenance items and quality requirements
- 13 metal structure
- 13.1 General provisions
- 13.2 Pressure steel pipe
- 13.3 gate
- 13.4 Hoist
- Appendix A (informative) Pumping and storage power station maintenance standards and quality requirements
1 Scope
This standard specifies the principle, project and quality requirements of the main equipment maintenance of the pumped storage power station.
This standard applies to the installed capacity of 250MW and above the pumped storage power station, 250MW below the pumped storage power plant reference to the
Standard implementation.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB 150 (all parts) pressure vessel
GB/T 4980 Volumetric compressor noise determination
Mechanical electrical machinery - Electrical equipment - Part 1. General technical requirements GB 5226.1
GB/T 5616 Guidelines for non - destructive testing
GB/T 5972 crane wire rope maintenance, maintenance, installation, inspection and scrapping
GB/T 7595 Transformer oil quality during operation
Quality of Turbine Oil in Operation of GB/T 7596 Power Plant
GB/T 7597 Sampling method for power oil (transformer oil, turbine oil)
Measurement and Evaluation of Mechanical Vibration of GB/T 7777 Volumetric Compressor
Basic technical conditions of GB/T 7894 hydro - generator
Specification for installation of GB/T 8564 hydro - generator sets
GB/T 8905 Guidelines for gas management and testing of sulfur hexafluoride electrical equipment
Technical condition of hydraulic turbine control system GB/T 9652.1
GB/T 10597 hoist type hoist
GB 11120 Turbine oil
Code for manufacture, installation and acceptance of steel gates for water conservancy and hydropower engineering GB/T 14173
Technical specification for relay protection and safety automatic device GB/T 14285
GB/T 14627 hydraulic hoist
Code for commissioning of GB/T 18482 reversible pumped storage unit
GB/T 20834 basic technical conditions for generating electric motors
GB/T 22384 Power system safety and stability control system inspection specification
GB/T 22581 basic technical conditions for Francis turbine turbines
Technical Guidance for On - line Monitoring System for Hydrogenerator Status of GB/T 28570
GB/T 29531 Pump vibration measurement and evaluation method
GB 50150 electrical installations installation engineering electrical equipment transfer test standards
General specification for construction and acceptance of mechanical equipment installation engineering GB 50231
Code for installation and acceptance of pressure steel pipes for hydropower and water conservancy projects GB 50766
Evaluation Criteria for Cavitation Erosion of DL/T 444 Counterattack Turbine […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 61 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 32574-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32574-2016
$1,010.00