Valid

GB/T 32563-2016Non-destructive testing—Ultrasonic testing—Test method for phased-array ultrasonic testing (English PDF)

无损检测超声检测相控阵超声检测方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32563-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

February 24, 2016

Implementation date

October 1, 2016

Scope

GB/T 32563-2016 is the English-translated version of 无损检测超声检测相控阵超声检测方法.

GB/T 32563-2016 is the Chinese standard "Non-destructive testing—Ultrasonic testing—Test method for phased-array ultrasonic testing".

Its scope clause reads: This standard specifies the use of manual scanning or automatic (semi-automatic) scanning one-dimensional linear array phased array ultrasound technology application of the basic principles, The selection rules of the process parameters when testing, and the method of determining the location and size of the defect.

This standard applies to the thickness of 6mm ~.200mm fine crystal steel welded joints. For other metal fine grain welding joints, in the test After changing the sound speed, you can also refer to this standard.

For welded joints beyond the above range, the instrumentation is demonstrated by demonstration Sufficient detection capacity, but also refer to this standard.

For austenitic stainless steel and other coarse crystalline welded joints, considering the signal to noise ratio and the speed of sound anisotropy Sexual impact, but also refer to this standard.

For other structural parts, calendering parts, forgings, in the selection of appropriate test block, calibration methods and scanning methods, but also refer to this standard.

The use of two-dimensional phased array ultrasound probe to detect, in considering the sound field characteristics and changes to the system calibration and detection of the impact, also Can refer to this standard. Its clauses include normative reference documents; terms and definitions.

Found what you need?

Document preview — GB/T 32563-2016

National Standard of the People's Republic of China

ICS: 19.100
Classification: J 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
Introduction
1 Scope
2 normative reference document
3 Terms and definitions
4 Detection of technical level
5 detectors
7 test pieces
9 Test preparation
11 Detection
13 Test Report
Appendix A (normative) Phased array probe wafer sensitivity difference and effectiveness test
Appendix B (Normative Appendix) Phased Array Inspection System Positioning Accuracy Test
Appendix C (informative) Common Other forms of welded joints Recommended scanning position

1 Scope

This standard specifies the use of manual scanning or automatic (semi-automatic) scanning one-dimensional linear array phased array ultrasound technology application of the basic principles,

The selection rules of the process parameters when testing, and the method of determining the location and size of the defect.

This standard applies to the thickness of 6mm ~.200mm fine crystal steel welded joints. For other metal fine grain welding joints, in the test

After changing the sound speed, you can also refer to this standard. For welded joints beyond the above range, the instrumentation is demonstrated by demonstration

Sufficient detection capacity, but also refer to this standard. For austenitic stainless steel and other coarse crystalline welded joints, considering the signal to noise ratio and the speed of sound anisotropy

Sexual impact, but also refer to this standard.

For other structural parts, calendering parts, forgings, in the selection of appropriate test block, calibration methods and scanning methods, but also refer to this standard.

The use of two-dimensional phased array ultrasound probe to detect, in considering the sound field characteristics and changes to the system calibration and detection of the impact, also

Can refer to this standard.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 9445 Non - destructive testing personnel qualification and certification

GB/T 12604.1 Non - destructive testing - Terminology - Ultrasonic testing

GB/T 23905 Non - destructive testing - Test block for ultrasonic testing

General technical conditions for non - destructive testing of ultrasonic phased array probes JB/T 11731

Non - destructive testing of pressure equipment - Part 3. Ultrasonic testing

3 terms and definitions

GB/T 9445 and GB/T 12604.1 and the following terms and definitions apply to this document.

3.1 Wafer pitch pitch

The distance between the sides of the two adjacent wafers or the center (see Fig. 1).

3.2 Wafer gap spacebetweenelements, gapbetweenelements

The gap between two adjacent wafers (see Figure 1).

3.3 Excitation aperture

The total length of the single excitation wafer group. which is.

Excitation aperture L = n × cd

Where.

L - excitation aperture;

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 34361-2026|GB/T 34362-2026|GB/T 36439-2026|GB/T 46978-2026|GB/T 47576-2026|GB/T 47577-2026

How to Download GB/T 32563-2016

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.