GB/T 32510-2016Guide for pumped storage power plant identification system (English PDF)

3.1

The cable identification is identificationofcable

Used to identify the cable type and the encoding of the start or end of the cable.

3.2 Signal identification

Used to identify the signal of the sender or receiver equipment and signal type and status of the code.

4.1

The marking system shall meet the requirements of each stage of engineering design, equipment manufacturing, construction, installation, commissioning and operation and maintenance, and shall be unique and

Contains information such as function, logical location, physical location, and so on.

4.2

identification system is divided into process-related identification, installation point identification, location identification, cable identification and signal identification, use as follows.

a) Process-related identification The system, equipment, and components used to identify the process.

b) Installation points Identify the systems, equipment, and wiring and installation locations used to identify electrical and instrumentation.

c) The location identifier is used to identify the building.

d) The cable identification is used to identify the starting or ending point of the cable and the type of cable.

e) The signal identification is used to identify the sender or receiver of the signal as well as the signal type.

4.3

Pumping storage power plant identification system coding work should include the following.

a) Identify the identification object.

b) Encoding buildings and rooms.