GB/T 32415-2015Technical requirements and testing methods for tower booster used in GSM/CDMA/WCDMA digital cellular mobile communication network (English PDF)
GSM/CDMA/WCDMA 数字蜂窝移动通信网塔顶放大器技术指标和测试方法
This is a limited preview
Buy now to download the full PDF (39 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32415-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2015
Implementation date
July 1, 2016
Scope
GB/T 32415-2015 is the English-translated version of GSM/CDMA/WCDMA 数字蜂窝移动通信网塔顶放大器技术指标和测试方法.
GB/T 32415-2015 is the Chinese standard "Technical requirements and testing methods for tower booster used in GSM/CDMA/WCDMA digital cellular mobile communication network".
Its scope clause reads: This standard specifies the 900/1800MHzGSM digital cellular mobile communication network, 800MHz/2GHzcdma2000/cdma2000 HRPD digital cellular mobile communication network and 2GHz WCDMA digital cellular mobile communication network tower top amplifier technical indicators, operational dimension Protection, environmental testing and other technical requirements and test methods.
This standard applies to 900/1800MHzGSM digital cellular mobile communication network, 800MHz/2GHzcdma2000/cdma2000 HRPD digital cellular mobile communication network and 2GHz WCDMA digital cellular mobile communication network in the two-way tower top amplifier and one-way overhead Amplifier.
Its clauses include normative reference documents; terms and definitions and abbreviations.
Found what you need?
Document preview — GB/T 32415-2015
National Standard of the People's Republic of China
- ICS
- 33.060
- Classification
- M 30
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and Definitions and Abbreviations
- 3.1 Terms and definitions
- 3.2 Abbreviations
- 4 test conditions and judgments based on
- 4.1 General test conditions
- 4.2 Test equipment requirements
- 4.3 Test Uncertainty
- 4.4 Test decision based on
- 5 working frequency band
- 6 technical indicators
- 6.1 Nominal maximum output power
- 6.1.1 Index requirements
- 6.1.2 Test Method
- 6.2 Output 1dB Compression point power (P-1)
- 6.2.1 Indicator requirements
- 6.2.2 Test Method
- 6.3 Automatic level control range
- 6.3.1 Indicator requirements
- 6.3.2 Test method
- 6.4 gain
- 6.4.1 Maximum gain
- 6.4.2 Gain adjustment range
- 6.4.3 Gain adjustment step size and error
- 6.5.1 Indicator requirements
- 6.5.2 Test Method
- 6.6 Byte loss/insertion loss
- 6.6.1 Indicator requirements
- 6.6.2 Test methods
- 6.7 Input/Output Voltage Standing Wave Ratio
- 6.7.1 Indicator requirements
- 6.7.2 Test methods
- 6.8 Noise figure
- 6.8.1 Indicator requirements
- 6.8.2 Test Method
- 6.9 Transmission delay
- 6.9.1 Indicator requirements
- 6.9.2 Test Method
- 6.10 Frequency error
- 6.10.1 Indicators Requirement
- 6.10.2 Test Method
- 6.11 Modulation accuracy
- 6.11.1 Indicator requirements
- 6.11.2 Test Method
- 6.12 Maximum lossless input power
- 6.12.1 Indicators Requirement
- 6.12.2 Test Method
- 6.13 intermodulation attenuation
- 6.13.1 Indicators Requirement
- 6.13.2 Test Method
- 6.14 spectrum emission template
- 6.14.1 Indicators Requirement
- 6.14.2 Test Method
- 6.15 Spurious radiation
- 6.15.1 Indicator requirements
- 6.15.2 Test Method
- 6.16 Output intermodulation
- 6.16.1 Indicator requirements
- 6.16.2 Test Method
- 6.17 Passive Intermodulation (PIM)
- 6.17.1 Indicator requirements
- 6.17.2 Test Method
- 7.1 Overview
- 7.2 Basic functions
- 7.3 Query function
- 7.4 Fault Management Functions
- 7.5 Control functions
- 7.6 System Security Management Functions
- 7.7 positioning support function
- 8 Environmental tests
- 8.1 Working environment requirements
- 8.1.1 Outdoor tower top amplifier
- 8.1.2 Indoor Tower Top Amplifier
- 8.2 Low temperature test
- 8.2.1 Indicator requirements
- 8.2.2 Test methods
- 8.3 High temperature test
- 8.3.1 Indicator requirements
- 8.3.2 Test methods
- 8.4 Damp heat test
- 8.4.1 Indicator requirements
- 8.4.2 Test Method
- 9.1 Earth conductor resistance and connection resistance
- 9.2 Dielectric strength
1 Scope
This standard specifies the 900/1800MHzGSM digital cellular mobile communication network, 800MHz/2GHzcdma2000/cdma2000
HRPD digital cellular mobile communication network and 2GHz WCDMA digital cellular mobile communication network tower top amplifier technical indicators, operational dimension
Protection, environmental testing and other technical requirements and test methods.
This standard applies to 900/1800MHzGSM digital cellular mobile communication network, 800MHz/2GHzcdma2000/cdma2000
HRPD digital cellular mobile communication network and 2GHz WCDMA digital cellular mobile communication network in the two-way tower top amplifier and one-way overhead
Amplifier.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 2423.1 Environmental testing for electric and electronic products - Part 2. Test methods - Test A. Low temperature
GB/T 2423.2 Environmental testing for electric and electronic products - Part 2. Test methods - Test B. High temperature
GB/T 2423.3 Environmental testing for electric and electronic products - Part 2. Test methods - Test Cab. constant damp heat test
Information technology - Equipment safety - Part 1. Generic requirements GB 4943.1-2011
YD/T 1139 900/1800MHzTDMA digital cellular mobile communication system electromagnetic compatibility requirements and measurement methods
Part 2. Base station and its auxiliary equipment
YD/T 1595.2 Electromagnetic compatibility requirements and measurement methods for 2GHz WCDMA digital cellular mobile communication systems Part 2
Sub-base station and its auxiliary equipment
YD/T 1597.2 800MHz/2GHz cdma2000 digital cellular mobile communication system electromagnetic compatibility requirements and measurement methods
Part 2. base stations and their auxiliary equipment
3 Terms and Definitions and Abbreviations
The following terms and definitions and abbreviations apply to this document.
3.1 Terms and definitions
3.1.1 Down downlink
From the base station to the mobile station.
3.1.2 Uplink
The link from the mobile station to the base station.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 39 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32415-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32415-2015
$600.00