GB/T 32365-2015Silicone rubber compound—Classification and system nomenclature (English PDF)
硅橡胶混炼胶 分类与系统命名法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32365-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2015
Implementation date
April 1, 2016
Scope
GB/T 32365-2015 is the English-translated version of 硅橡胶混炼胶 分类与系统命名法.
GB/T 32365-2015 is the Chinese standard "Silicone rubber compound—Classification and system nomenclature". Its scope clause reads: This standard specifies the silicon rubber compound classification and nomenclature system. Its clauses include classification and nomenclature system.
Found what you need?
Document preview — GB/T 32365-2015
National Standard of the People's Republic of China
- ICS
- 83.060
- Classification
- G 40
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Classification and nomenclature system
- 3.1 General
- 3.2 silicone rubber compound category
- 3.3 Hardness
- 3.4 Performance Symbol
1 Scope
This standard specifies the silicon rubber compound classification and nomenclature system.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 528-2009 Determination of vulcanized rubber or thermoplastic rubber tensile stress-strain properties
GB/T 529-2008 Determination of vulcanized rubber or thermoplastic rubber tear strength (Trouser, angle and crescent test pieces)
GB/T 531.1-2008 vulcanized rubber or thermoplastic rubber indentation hardness test methods - Part 1. Method Shore Hardness (Shore
Seoul hardness)
GB/T 1690 vulcanized rubber or thermoplastic rubber Test method for resistance to liquids
GB/T 1695 vulcanized rubber frequency breakdown voltage strength and determination withstand voltage
Determination of GB/T 2439 vulcanized rubber or thermoplastic rubber conductive and dissipative resistivity
GB/T 3512 vulcanized rubber or thermoplastic rubber hot air and heat accelerated aging test
GB 4806.1 rubber products food hygiene standards
GB/T 5576-1997 rubber and latex nomenclature
GB/T 7759-1996 vulcanized rubber, thermoplastic rubber at room temperature, high and low temperature compression set determination
Determination of GB/T 10707-2008 Performance of burning rubber
Determination of GB/T 11205 rubber thermal conductivity of the hot-wire method
GB/T 15256-2014 vulcanized rubber or thermoplastic rubber low temperature brittleness measurement (multiple test piece method)
3 Classification and nomenclature system
3.1 General
Silicone rubber compound classification and naming system made of silicone rubber compound type, hardness, performance and symbols (or) use symbols.
When a particular product standard provisions of this standard conflict, priority should be given product standards.
3.2 silicone rubber compound category
Silicone rubber silicone rubber mix based on species classification, with GB/T 5576-1997 specified in the "Q" symbol represents the group of silicone rubber.
3.3 Hardness
3.3.1
Take hardness GB/T 531.1-2008 predetermined Shore A hardness.
3.3.2
Hardness nominal value basis, by the numeric portion of the two-digit code represents, such as hardness of (30 ± 2) Shore A, denoted as 30.
3.4 Performance Symbol
Performance Characterization symbol consists of silicone rubber mix remarkable performance of English letters, symbols performance shown in Table 1 is recommended.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 32365-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 32365-2015
$85.00