GB/T 32329-2015Test method for oxidation resistance of oxynitride materials - Non-isothermal oxidation (English PDF)
氮氧化物材料抗氧化性试验方法 变温氧化法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32329-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2015
Implementation date
July 1, 2016
Scope
GB/T 32329-2015 is the English-translated version of 氮氧化物材料抗氧化性试验方法 变温氧化法.
GB/T 32329-2015 is the Chinese standard "Test method for oxidation resistance of oxynitride materials - Non-isothermal oxidation".
Its scope clause reads: This standard specifies the variable temperature oxidation of nitrogen oxide material oxidation resistance test principle, test equipment and instruments, samples, test procedures, Result of the calculation, evaluation and test report.
This standard applies to nitrogen oxide material oxidation resistance testing and evaluation under high temperature conditions. Its clauses include terms and definitions; test equipment and apparatus.
Found what you need?
Document preview — GB/T 32329-2015
National Standard of the People's Republic of China
- ICS
- 81.080
- Classification
- Q 49
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 5 Test equipment and apparatus
1 Scope
This standard specifies the variable temperature oxidation of nitrogen oxide material oxidation resistance test principle, test equipment and instruments, samples, test procedures,
Result of the calculation, evaluation and test report.
This standard applies to nitrogen oxide material oxidation resistance testing and evaluation under high temperature conditions.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 8170 repair value expressed about the rules and limit values and judgment
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Nitrogen oxide material
The Si, Al, Mg and other elements of nitride, oxide formed a solid solution ceramic materials, including sialon (SiAlON), Aaron (AlON), magnesium Aaron (MgAlON) series materials.
3.2 Oxidation resistance
The ability of a material to resist oxidation in an oxidizing atmosphere at a temperature of.
Principle 4
In the high-temperature oxidizing atmosphere, nitrogen oxide material oxidation reaction occurs above a certain temperature, the quality will increase with temperature increase. With increasing temperature, the oxidation reaction rate to accelerate. When the surface is completely oxidized, and its quality is no longer increasing temperature
Increases. By measuring the mass of the sample at a series of temperatures, can be plotted versus specimen quality and temperature, and then calculated by
To oxidation weight gain per unit area of the sample, the initial oxidation temperature, the maximum rate of oxidation temperature and other indicators used to characterize the oxidation resistance of the sample.
5 Test equipment and apparatus
5.1 Furnace
Temperature zone temperature is less than or equal to 5 °C, the highest temperature of greater than or equal to 1600 °C. Having at least a gas line (at the bottom of the inlet,
Top outlet), through the flow of 0.5L/min ~ 5L/min of gas. The furnace should be able to analyze samples Balances
Real-time measurement.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32329-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32329-2015
$135.00