GB/T 32328-2015Quality and environment safety evaluation guidelines for integrated utilization product of industrial solid waste (English PDF)
工业固体废物综合利用产品环境与质量安全评价技术导则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32328-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2015
Implementation date
July 1, 2016
Scope
GB/T 32328-2015 is the English-translated version of 工业固体废物综合利用产品环境与质量安全评价技术导则.
GB/T 32328-2015 is the Chinese standard "Quality and environment safety evaluation guidelines for integrated utilization product of industrial solid waste".
Its scope clause reads: This standard provides the comprehensive utilization of industrial solid waste products (referred to solid waste product) evaluation principles relating to environmental safety and quality and safety, Evaluation index system, evaluation methods and procedures.
This standard applies to the safety evaluation of solid waste on the environment and the quality of products, the specific standards applicable to. gangue, fly ash, metallurgical slag, Industrial by-product gypsum tailings and other major bulk of industrial solid waste for the production of raw materials for a variety of building materials, other industrial solid waste comprehensive May refer to the use of product evaluation. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 32328-2015
National Standard of the People's Republic of China
- ICS
- 13.020.10
- Classification
- Z 00
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 5 Evaluation Index System
- 5.1 Qualitative Evaluation
- 5.2 Quantitative Evaluation
- 6 evaluation methods and procedures
- 6.1 Evaluation of documentation needed
- 6.2 Evaluation Method
- 6.3 Evaluation Program
1 Scope
This standard provides the comprehensive utilization of industrial solid waste products (referred to solid waste product) evaluation principles relating to environmental safety and quality and safety,
Evaluation index system, evaluation methods and procedures.
This standard applies to the safety evaluation of solid waste on the environment and the quality of products, the specific standards applicable to. gangue, fly ash, metallurgical slag,
Industrial by-product gypsum tailings and other major bulk of industrial solid waste for the production of raw materials for a variety of building materials, other industrial solid waste comprehensive
May refer to the use of product evaluation.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2589 General Principles of comprehensive energy consumption calculation
GB 6566 building materials radionuclide limits
GB 8978 Integrated Wastewater Discharge Standard
GB 12348 industrial enterprises of environmental noise emission standard plant boundary
GB 16297 Air Pollutant Emission Standards
GB 18597 Hazardous Waste Storage Pollution Control Standard
GB 18599 general industrial solid waste storage and disposal site pollution control standards
GB/T 18820 industrial products Intake Quota General
GB/T 19001 Quality Management System Requirements
GB/T 20861 waste products recycling terminology
GB/T 24004 Environmental Management System principles, systems and supporting techniques General guidelines
GB/T 28001 Occupational Health and Safety Management System Requirements
3 Terms and Definitions
GB/T 20861 and defined by the following terms and definitions apply to this document.
3.1 Industrial solid waste
Produced in the industrial production of solid waste is discharged into the environment in the process of industrial production of all kinds of waste, waste water, dust and other waste
Objects, can be divided into general industrial solid waste and industrial hazardous waste.
3.2 Industrial solid waste utilization products
Use a certain percentage of industrial solid wastes as raw materials through processing, production and sales for the finished product.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32328-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32328-2015
$205.00