Valid

GB/T 32294-2015Forged unions, socket-welding and threaded (English PDF)

锻制承插焊和螺纹活接头

Preview PDF

This is a limited preview

Buy now to download the full PDF (18 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32294-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 10, 2015

Implementation date

July 1, 2016

Scope

GB/T 32294-2015 is the English-translated version of 锻制承插焊和螺纹活接头.

GB/T 32294-2015 is the Chinese standard "Forged unions, socket-welding and threaded".

Its scope clause reads: This standard specifies the variety and code of forged socket and threaded union, product structure, grade, takeover size, order size, size With tolerances, materials, manufacturing, heat treatment, inspection and testing, and marking requirements.

This standard applies to industrial piping systems in the nominal size of not more than DN80 (NPS3), the level of Class3000 socket welding and thread Union. Its clauses include normative reference documents; variety and code.

Found what you need?

Document preview — GB/T 32294-2015

National Standard of the People's Republic of China

ICS
23.040.60
Classification
J 15

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 normative reference document
  • 3 variety and code
  • 4 product structure
  • 5 level
  • 6 take over the size of
  • 7 Ordering contents
  • 8 Size and Tolerance
  • 10 manufacturing
  • 12 Test and test
  • 13 logo
  • 14 Surface protection and packaging
  • 15 product quality certificate
  • 16 Installation Precautions
  • Appendix A (informative) Pressure - Temperature Rating
  • Appendix B (normative) Dimensions of steel pipes connected to live joints Table
  • Appendix C (normative appendices) Additional requirements
  • Appendix D (informative) Raw materials for the manufacture of union joints
  • Appendix E (informative) Installation Precautions

1 Scope

This standard specifies the variety and code of forged socket and threaded union, product structure, grade, takeover size, order size, size

With tolerances, materials, manufacturing, heat treatment, inspection and testing, and marking requirements.

This standard applies to industrial piping systems in the nominal size of not more than DN80 (NPS3), the level of Class3000 socket welding and thread

Union.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 222 Determination of chemical composition of finished steel

GB/T 223 (all parts) Chemical analysis methods for steel and alloys

Metallic materials - Tensile testing - Part 1. Test methods for room temperature GB/T GB/T 229 Metallic materials Chibi pendulum impact test method

Metallic materials - Brinell hardness test - Part 1. Test methods

Corrosion of metals and alloys - Test method for intergranular corrosion of stainless steels

GB/T 4336 carbon steel and low alloy steel spark source atomic emission spectrometric method (conventional method)

GB/T 6394 Determination of average grain size of metals

GB/T 7306.2 55 ° sealed pipe thread - Part 2. Conical internal thread and conical external thread

GB/T 9452 heat treatment furnace effective heating zone determination method

GB/T 10561 Determination of content of nonmetallic inclusions in steel Standard grading diagram Microscopy method

GB/T 11170 Determination of multi-element content of stainless steel Spark discharge atomic emission spectrometry (conventional method)

GB/T 12716 60 ° sealing pipe thread

Types of inspection documents for steel and steel products GB/T 18253-2000

GB/T 20666 Unified thread tolerances

GB/T 20667 uniform thread limit size

Basic dimensions of uniform thread GB/T GB/T 20669 uniform thread type

GB/T 20670 uniform thread diameter and number of teeth series

Specification for pressure piping - Industrial piping - Part 2. Materials

Rules for selection of seamless and welded steel pipe sizes for piping works GB/T 28708-2012

Non - destructive testing of pressure equipment - Part 3. Ultrasonic testing

Non - destructive testing of pressure equipment - Part 4. Magnetic particle testing

Non - destructive testing of pressure equipment - Part 5. Penetrant testing

3 variety and code

The variety and code of the union are shown in Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.

Similar standards

How to Download GB/T 32294-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
18 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32294-2015

$315.00