Valid

GB/T 32198-2015Standard practice for general techniques of infrared quantitative analysis (English PDF)

红外光谱定量分析技术通则

Preview PDF

This is a limited preview

Buy now to download the full PDF (24 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32198-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 10, 2015

Implementation date

July 1, 2016

Scope

GB/T 32198-2015 is the English-translated version of 红外光谱定量分析技术通则.

GB/T 32198-2015 is the Chinese standard "Standard practice for general techniques of infrared quantitative analysis". Its scope clause reads: standard specifies the infrared quantitative analysis of the most common technique, with and without the use of computer data collection and analysis of data related to terms Content.

This standard does not involve security issues relating to the actual use of the process. Users are, shall determine the limitations of the standard applications, and We have the responsibility to develop appropriate safety and health practices.

For safe handling, see Chapter 6 and A.4.5.1.3, Notes 1, A.4.6.1.3 in A.5.6 in Note 1 and Note 1. Its clauses include terms, definitions and symbols; general description; device.

Found what you need?

Document preview — GB/T 32198-2015

National Standard of the People's Republic of China

ICS: 71.040.10
Classification: N 53

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
5 Equipment
6 Hazard
7 Infrared Quantitative Analysis Note 2 test
8 Single Component Analysis Theory
9 single-component working curve drawing
10 4-component analysis theory
12 5 Baseline
13 single-band measurements
14 baseline method
15 non-solution analysis
16 spectral subtraction
18 Beer's Law curvature correction in FIG.
Appendix A (normative) Operation Guide
References

1 Scope

1.1

standard specifies the infrared quantitative analysis of the most common technique, with and without the use of computer data collection and analysis of data related to terms

Content.

1.2

This standard does not involve security issues relating to the actual use of the process. Users are, shall determine the limitations of the standard applications, and

We have the responsibility to develop appropriate safety and health practices. For safe handling, see Chapter 6 and A.4.5.1.3, Notes 1, A.4.6.1.3 in

A.5.6 in Note 1 and Note 1.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

ASTME131 molecular spectroscopy related terms (TerminologyRelatingtoMolecularSpectroscopy)

ASTME334 infrared microanalysis General Technology (PracticesforGeneralTechniquesofInfraredMicroanaly- sis)

ASTME932 dispersive infrared spectroscopy characterization and measurement performance (PracticeforDescribingandMeasuringPer- formanceofDispersiveInfraredSpectrometers)

ASTME1252 infrared spectroscopy qualitative analysis General (PracticeforGeneralTechniquesforObtainingIn- fraredSpectraforQualitativeAnalysis)

ASTME1421 Fourier transform infrared (FT-IR) to characterize and measure the performance of the spectrometer. 0 and Level 1 is filled with zeros [Practice forDescribingandMeasuringPerformanceofFourierTransformInfrared (FT-IR) Spectrometers.

LevelZeroandLevelOne]

ASTME1655 infrared multivariate quantitative analysis techniques General (PracticesforInfraredMultivariateQuantitativeAnalysis)

3 Terms, definitions and symbols

Terms, definitions and symbols ASTME131 defined apply to this document.

4 General Description

This standard provides a set for all IR workers from preparation, infrared spectroscopy analysis of the operation to calculate the guidance technology.

5 device

Premise 5.1 standard analytical techniques described in the infrared is that the quality of the instrument should not only meet the common commercial standards, but also meet the

Manufacturer's specifications. Dispersive Fourier transform instruments and apparatus respectively refer ASTME1421 and ASTME932, microanalysis

See ASTME334.

5.2

In developing a new spectroscopic methods, the researchers should describe repeatability and bias performance used equipment and instrumentation, the method can […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 47026-2026|GB/T 43859-2024|GB/T 42753-2023|GB/T 42754-2023|GB/T 42027-2022|GB/T 12519-2021

How to Download GB/T 32198-2015

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.