GB/T 31745-2015Wear-resisting varnished solid wood flooring (English PDF)
高耐磨漆饰实木地板
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31745-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 3, 2015
Implementation date
November 2, 2015
Scope
GB/T 31745-2015 is the English-translated version of 高耐磨漆饰实木地板.
GB/T 31745-2015 is the Chinese standard "Wear-resisting varnished solid wood flooring". Its scope clause reads: This standard specifies the terms and definitions of high wear-resistant paint decorative wood flooring, classification, requirements, test methods, inspection rules, and packaging, marking, Transport and storage.
This standard applies to air-dry density of 0.32g/cm3 conifer wood and air dry density of not less than 0.50g/cm3 Hardwood substrate, After the paint surface treatment, wear resistance index greater than or equal 1500 rpm solid wood flooring. Its clauses include terms and definitions; requirements.
Found what you need?
Document preview — GB/T 31745-2015
National Standard of the People's Republic of China
- ICS
- 79.080
- Classification
- B 69
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Requirements
1 Scope
This standard specifies the terms and definitions of high wear-resistant paint decorative wood flooring, classification, requirements, test methods, inspection rules, and packaging, marking,
Transport and storage.
This standard applies to air-dry density of 0.32g/cm3 conifer wood and air dry density of not less than 0.50g/cm3 Hardwood substrate,
After the paint surface treatment, wear resistance index greater than or equal 1500 rpm solid wood flooring.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2828.1-2012 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample plan
GB/T 4893.4 furniture surface film cross-cut adhesion assay
GB/T 15036.1 wood floors - Part 1. Technical requirements
GB/T 15036.2 wood flooring - Part 2. Test methods
GB/T 17657 panels and veneer plywood physical and chemical performance test method
GB/T 18102 Laminate flooring
3 Terms and Definitions
GB/T 15036.1 as defined in the following terms and definitions apply to this document.
3.1
To air-dry density of 0.32g/cm3 conifer wood and air dry density of not less than 0.50g/cm3 hardwood timber for the substrate, the surface
Paint handling, wear resistance index greater than or equal to 1500 rpm solid wood flooring.
4 Requirements
4.1 Dimensions and tolerances
4.1.1
Size high wear-resistant paint decorative wood floor should meet the requirements of Table 1.
Table 1 high wear-resistant paint decorative wood floor dimensions in millimeters
Length Width Thickness tongue width
>=250 >=40 >=8 >=3.0
Other sizes of products according to the agreement between the Executive.
Depending on the installation need to be in the same proportion of the sales floor area does not exceed 5% of the generous length of less than the nominal size of the floor.
4.1.2
high wear-resistant paint decorative wood flooring dimensional deviations shall comply with the requirements in Table 2.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31745-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31745-2015
$145.00