GB/T 31409-2015Standard test method for total copper in antifouling paints (English PDF)
船舶防污漆总铜含量测定法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31409-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 15, 2015
Implementation date
October 1, 2015
Scope
GB/T 31409-2015 is the English-translated version of 船舶防污漆总铜含量测定法.
GB/T 31409-2015 is the Chinese standard "Standard test method for total copper in antifouling paints".
Its scope clause reads: This standard specifies the test method for the determination of total copper antifouling paint content, comprising. a principle of the method, reagents, equipment, sampling, laboratory Step, test and analysis, the results of calculations, test reports.
Test methods specified in this standard includes the following two. a) Method A. electrophoresis electrode; b) Method B. Atomic Absorption Spectrometry. Its clauses include principle of the method; reagents.
Found what you need?
Document preview — GB/T 31409-2015
National Standard of the People's Republic of China
- ICS
- 87.040
- Classification
- G 50
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 PRINCIPLE OF THE METHOD
- 4 Reagents
1 Scope
This standard specifies the test method for the determination of total copper antifouling paint content, comprising. a principle of the method, reagents, equipment, sampling, laboratory
Step, test and analysis, the results of calculations, test reports.
Test methods specified in this standard includes the following two.
a) Method A. electrophoresis electrode;
b) Method B. Atomic Absorption Spectrometry.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Determination matter content GB/T 1725-2007 Paints, varnishes and plastics non-volatile
GB/T 3186 Paints, varnishes and raw materials for paints and varnishes - Sampling
Laboratory use specifications and test methods GB/T 6682-2008 Analysis
3 PRINCIPLE OF THE METHOD
Method A. Weigh a certain amount of paint samples in the beaker to evaporate the solvent to remove organics which burned at 600 °C get dry
Gray, then adding an acid to digest, after dilution dissolved, insolubles were removed by filtration, the filtrate was electrolysis to precipitate copper attached to the platinum electrode.
Calculate the mass percentage of copper deposited to obtain the number of the total content of copper, which can be in terms of the content of the original copper compound.
Method B. antifouling paint dry sample with a suitable acid solution was sealed microwave digestion, the rush acid, constant volume after treatment, using flame atomic absorption
Spectroscopy or income to meet current and effective method for testing the accuracy of the analysis of each sample of the total copper content can be obtained in the antifouling paint
The percentage of the total content of copper or copper quality.
4 Reagents
Unless otherwise indicated, the reagents used in the analysis were of analytical grade water to comply with GB/T 6882-2008 requirements for secondary water. The standard
Reagents quasi involved are as follows.
4.1
Method A
The reagents used.
a) nitric acid, rho about 1.42g/mL;
b) perchloric acid, the mass fraction of from 69% to 72%;
c) an alcohol or acetone;
d) ammonium sulfate.
4.2 Method B
The reagents used.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31409-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31409-2015
$145.00