Valid

GB/T 31403-2015Plastics—Acrylonitrile-butadiene-styrene/poly (methyl methacrylate) alloy (English PDF)

塑料 丙烯腈-丁二烯-苯乙烯/聚甲基丙烯酸甲酯合金

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31403-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 15, 2015

Implementation date

October 1, 2015

Scope

GB/T 31403-2015 is the English-translated version of 塑料 丙烯腈-丁二烯-苯乙烯/聚甲基丙烯酸甲酯合金.

GB/T 31403-2015 is the Chinese standard "Plastics—Acrylonitrile-butadiene-styrene/poly (methyl methacrylate) alloy". Its scope clause reads: This standard specifies the acrylonitrile - butadiene - styrene/PMMA alloy (ABS/PMMA) terms and definitions, naming, Requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to by alloying to give a uniform appearance of the ABS/PMMA material. This material is mainly used for household appliances, High gloss information technology equipment, office equipment and automotive products such as spray-free components. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 31403-2015

National Standard of the People's Republic of China

ICS
83.080.20
Classification
G 32

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references

1 Scope

This standard specifies the acrylonitrile - butadiene - styrene/PMMA alloy (ABS/PMMA) terms and definitions, naming,

Requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to by alloying to give a uniform appearance of the ABS/PMMA material. This material is mainly used for household appliances,

High gloss information technology equipment, office equipment and automotive products such as spray-free components.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

1033.1-2008 non-plastic foam density measurement GB/T Part 1. Immersion method, liquid pyknometer method and titration method

GB /1040.2-2006 Plastics Determination of tensile properties T Part 2. Test plastics molding and extrusion conditions

Determination of GB/T 1634.2-2004 Plastics deflection temperature under load - Part 2. Plastics, ebonite and long-fiber-reinforced composite material

Determination of strength GB/T 1843 plastic Izod impact

GB/T 1844.1 Plastics - Symbols and abbreviations - Part 1. Basic polymers and their special characteristics

Determination of GB/T 2410-2008 transparent plastic light transmittance and haze

GB/T 2547 plastic sampling method

GB/T 2918 plastic sample conditioning and testing of the standard environment

Determination of GB/T 3682-2000 quality thermoplastic melt flow rate and melt volume flow rate

GB/T 5169.16 Fire hazard testing for electric and electronic products - Part 16. Test flames - 50W horizontal and vertical flame test method

GB/T 8170 repair value expressed about the rules and limit values and judgment

GB/T 8807 Test methods for specular gloss plastic

Determination of GB/T 9341 plastic bending performance

GB/T 17037.1-1997 Preparation of injection molded thermoplastic material specimens - Part 1. General principles and multipurpose specimens and long

Article prepared sample

GB/T 20417.2 plastics acrylonitrile - butadiene - styrene (ABS) molding and extrusion materials - Part 2. Sample preparation and sexual

Can be measured

GB/T 26125 electrical and electronic products six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers) Determination

GB/T 26572 Limited restricted substances in electrical and electronic equipment requirements

SH/T 1541 Test Method Appearance thermoplastic particles

3 Terms and Definitions

The following terms and definitions apply to this document.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 31403-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 31403-2015

$205.00