GB/T 31301.2-2015Footwear manufacturing machines—Safety requirements—Part2: Nailing machines (English PDF)
制鞋机械 安全要求 第2部分:钉跟机
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31301.2-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 10, 2015
Implementation date
July 1, 2016
Scope
GB/T 31301.2-2015 is the English-translated version of 制鞋机械 安全要求 第2部分:钉跟机.
GB/T 31301.2-2015 is the Chinese standard "Footwear manufacturing machines—Safety requirements—Part2: Nailing machines". Its scope clause reads: This section GB/T 31301 specifies the safety requirements for design and construction aspects of the nailing machine involved.
This section contains the operator of the The expected use of the machine and all major hazards, hazardous situations and hazardous events associated with the nailing machine foreseeable misuse produced (see attached Record A).
This section applies to the footwear industry with the use of semi-automatic nail machines and automatic heel nailing machine.
Found what you need?
Document preview — GB/T 31301.2-2015
National Standard of the People's Republic of China
- ICS
- 61.060
- Classification
- Y 99
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Safety requirements and/or protective measures
- 5 Safety requirements and/or protective measures of verification
- 6 10 use of information
- Appendix A (informative) List of Hazardous 11 major
- Appendix B (normative) proven elements and principles
- Annex C (normative) stop and release the control device
- Annex D (informative) Nails with machine noise test specification
- References
1 Scope
This section GB/T 31301 specifies the safety requirements for design and construction aspects of the nailing machine involved. This section contains the operator of the
The expected use of the machine and all major hazards, hazardous situations and hazardous events associated with the nailing machine foreseeable misuse produced (see attached
Record A).
This section applies to the footwear industry with the use of semi-automatic nail machines and automatic heel nailing machine.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 3766-2001 Hydraulic System General technical conditions
GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements
GB/T 7932-2003 General technical conditions of pneumatic systems
GB/T 8196-2003 mechanical safety devices fixed and movable guards General requirements for the design and manufacture
GB 14048.4-2010 Low-voltage switchgear and control equipment - Part 4-1. Contactors and motor starters electromechanical contact
Contactors and motor starters (with motor protection)
GB 14048.5-2008 Low-voltage switchgear and control equipment Part 5-1. Control circuit devices and switching element Electromechanical control
Electrical circuit
GB/T 15706-2012 Safety of machinery - General principles for design risk assessment and risk reduced
GB 16754-2008 Safety of machinery - Emergency stop design principles
GB/T 16855.1-2008 Safety of machinery - Safety-related control system components - Part 1. General principles for design
GB/T 17454.2-2008 Safety of machinery - Part 2 sensitive protective devices. pressure sensitive edges and pressure sensitive bars design and testing General
GB 18209.1-2000 Electrical safety of machinery - Indication, marking and actuation - Part 1. Requirements for visual, auditory and tactile signals
Claim
GB/T 18717.1-2002 for the safety of machinery - Ergonomic design - Part 1. body into the correct mechanical opening size
With principles
Ergonomic design - Part 2 GB/T 18717.2-2002 for the safety of machinery. body into mechanical foot opening
Inch determining principle
GB/T 19670-2005 Safety of machinery - Prevention of unexpected start
GB/T 19671-2005 Safety of machinery - hands control devices - Functional aspects and design principles
Location GB/T 19876-2012 Safety of machinery and parts of the body close to the speed-related safety devices
GB 23821-2009 Safety of machinery - Safety distances to prevent danger zones being reached on the lower limbs
GB/T 25078.1-2010 Acoustics low-noise machinery and equipment design and implementation of the recommendations - Part 1. Planning
ISO 9355-1.1999 display and control regulator design Ergonomic requirements for Part 1. the user and the display and control actuators […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31301.2-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 31301.3-2015 — Footwear manufacturing machines—Safety require—Part 3: Grinding and polishing machines
GB/T 31301.1-2015 — Footwear manufacturing machines—Safety requirements—Part 1: Lasting machines
GB/T 31301.4-2015 — Footwear manufacturing machines—Safety requirements—Part 4: Foorwear moulding machines
GB/T 31301.2-2015
$295.00