Valid

GB/T 31210.1-2014Green manufacturing—Near dry cutting—Part 1: General requirements (English PDF)

绿色制造 亚干式切削 第1部分:通用技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31210.1-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 3, 2014

Implementation date

May 1, 2015

Scope

GB/T 31210.1-2014 is the English-translated version of 绿色制造 亚干式切削 第1部分:通用技术要求.

GB/T 31210.1-2014 is the Chinese standard "Green manufacturing—Near dry cutting—Part 1: General requirements". Its scope clause reads: GB/T 31210 in this section specifies the general requirements of sub-dry cutting and dry sub-cutting machine tools, cutting tools, cooling and lubricating medium and micro Workpiece requirements.

This section applies to metallic materials - dry cutting. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 31210.1-2014

National Standard of the People's Republic of China

ICS
25.010
Classification
J 30

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 Asian dry cutting [quasi-dry machining]
  • 3.2 Micro cooling and lubricating medium [MQL media]
  • 3.3 MQL cutting
  • 3.4 Low MQL cutting cryogenicMQLcutting

1 Scope

GB/T 31210 in this section specifies the general requirements of sub-dry cutting and dry sub-cutting machine tools, cutting tools, cooling and lubricating medium and micro

Workpiece requirements.

This section applies to metallic materials - dry cutting.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 9061 General technical conditions for metal cutting machine tools

GB 15760 metal cutting machine tool safety general technology condition

GB/T 16769 Metal Cutting Machine noise level measurement method

GB/T 23573 metal cutting machine dust concentration measurement method

GB/T 23574 Metal Cutting Machine mist concentration measurement method

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Asian dry cutting [quasi-dry machining]

With certain technical methods, using only a small amount of cooling lubricant to the cutting zone implementation lubrication, cooling or protection of cutting technology.

NOTE. rewrite GB/T 28612-2012, definitions 3.2.15.

3.2 Micro cooling and lubricating medium [MQL media]

The micro cooling lubricant (hereinafter referred to as micro-lubricant) into the gas stream has a certain pressure in the injection formation of fogging.

Note 1. Not only refers to the cooling lubricant oil-based and water-based cutting fluids, lubricants, but generally refers to a cooling and lubrication, can be used for sub-dry cutting material,

The cutting fluid or nano powder.

Note 2. The gas flow refers to an air or shielding gas (such as carbon dioxide or nitrogen).

3.3 MQL cutting

In cutting, the MQL medium enters the cutting area of the cutting area to lubricate and cool the implementation of cutting technology.

3.4 Low MQL cutting cryogenicMQLcutting

Cryogenic refrigeration system after a special MQL medium enters the cutting area of the cutting area to implement low-temperature lubrication and cooling of cutting technology.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 31210.1-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 31210.1-2014

$145.00