Valid

GB/T 31209-2014Technical requirements for cryogenic cold air cutting (English PDF)

绿色制造 低温冷风切削 技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31209-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 3, 2014

Implementation date

May 1, 2015

Scope

GB/T 31209-2014 is the English-translated version of 绿色制造 低温冷风切削 技术要求.

GB/T 31209-2014 is the Chinese standard "Technical requirements for cryogenic cold air cutting". Its scope clause reads: This standard specifies the general requirements for low temperature cold cutting, preparation and cold gas source requirements, technical requirements and the scope of application of low-temperature cold cutting Wai.

This standard applies to low temperature cold cutting metal materials and non-metallic materials. Its clauses include terms and definitions; general requirements.

Found what you need?

Document preview — GB/T 31209-2014

National Standard of the People's Republic of China

ICS
25.010
Classification
J 30

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 General requirements

1 Scope

This standard specifies the general requirements for low temperature cold cutting, preparation and cold gas source requirements, technical requirements and the scope of application of low-temperature cold cutting

Wai.

This standard applies to low temperature cold cutting metal materials and non-metallic materials.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 31210.1 green manufacturing sub-dry cutting - Part 1. General technical requirements

GB/T 31210.2 green manufacturing sub-dry cutting - Part 2. Micro lubrication system technical requirements

3 Terms and Definitions

GB/T 31210.1, GB/T 31210.2 defined and the following terms and definitions apply to this document.

3.1 Low temperature cold cutting

By means of certain technical methods, the low temperature gas stream below 0 °C low temperature lubricants or mixed trace gas stream enters the cutting area, the implementation of cold

Cooling, lubrication or protection of cutting technology.

Note. generally include dry cold cold cutting, cold cutting MQL, dry cold protective gas cutting, freezing cold wind cutting like.

3.2 Dry low temperature cold cutting

By means of certain technical methods, the cryogenic air stream enters the cutting area of the cutting area of the cutting implement cooling technology.

3.3 Dry cold protective gas cutting

By means of certain technical methods, the low temperature gas stream enters the cutting area protection, the implementation of the cutting area to cool and protect cutting technology.

3.4 Freezing cold cutting

By means of certain technical method, a low temperature below 0 °C cryogenic stream enters the cutting area of the workpiece, the workpiece to maintain a frozen state, low

Temperature cutting technology.

4 General requirements

4.1

cryogenic cold cutting should be consistent with GB/T 31210.1 requirements and GB/T 31210.2 of.

4.2

cryogenic cold cutting implement, should strictly enforce the relevant safety procedures.

After 4.3 cryogenic cold cutting, should be implemented in time for the rust-proofing treatment of machined parts, tools and related station equipment. Low temperature cold

Cutting machine tools should have the appropriate anti-frost, moisture, rust, clean and chip measures.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 31209-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 31209-2014

$85.00